Workshop on Accelerator R&D for Ultimate Storage Rings

→Asia/Shanghai
Qing Qin(IHEP),Robert Hettel(SLAC)
Description
Storage ring-based light sources will continue to play a vital role in X-ray science into the future since they offer beam properties that are complementary to FEL sources. Ring-based sources provide highly stable photon beams having low peak brightness with high average brightness and pulse repetition rate, photons that do not over-excite or damage samples the way those from FELs do, and they serve a large number of diverse users simultaneously. There are now emerging scientific applications and experimental methods that would greatly benefit from ring-based sources having much higher brightness and transverse coherence than present or near-future storage ring facilities – storage rings having electron emittance < ~100 pm-rad in both transverse planes – on the scale of the diffraction limited emittance for hard X-rays. Several institutions world-wide are now including the prospect of building diffraction-limited “ultimate” storage rings (USRs) in their 10-year development plans. These machines push the state of the art for storage ring accelerator and photon beam line design, presenting many significant challenges that must be addressed with R&D.
Participants
  • Tuesday 30 October
    • Welcome and Introduction Session
      Convener: Xiaoming Jiang(Institute of High Energy Physics, CAS)
      • 1
        Welcome
        Speaker: Prof.Yifang Wang(Institute of High Energy Physics, CAS)
        Slides
      • 2
        Workshop charge
        Speaker: DrQing Qin(Institute of High Energy Physics, CAS)
        Slides
      • 3
        Scientific cases for USR
        Speaker: Prof.Hong Ding(Institute of Physics, CAS)
      • 4
        Highlights of science of USR
        Speaker: Prof.Yuhui Dong(Institute of High Energy Physics, CAS)
        Slides
      • 5
        Overview of USR design and performance requirements
        Speaker: Robert Hettel(SLAC NAL)
        Slides
    • Session 1: Lattice Design (part 1)
      Convener: Gang Xu(Institute of High Energy Physics, CAS)
      • 6
        MAX-IV project and MBA with higher multipoles
        Speaker: DrSimon Leemann(MAX IV Laboratory)
        Slides
      • 7
        Latest development of ESRF and future plan
        Speaker: DrPantaleo Raimondi(ESRF)
        Slides
      • 8
        Lattice design for Spring-8 II
        Speaker: DrYoshito Shimosaki(JASRI / SPring-8)
        Slides
    • 10:35
      Group photo and Coffee break
    • Session 2: Lattice Design (part 2)
      Convener: Haruo Ohkuma(Spring-8)
      • 9
        USR upgrade for ALS
        Speaker: DrChristoph Steier(Lawrence Berkeley National Laboratory)
        Slides
      • 10
        Study of lower emittance lattice at SOLEIL
        Speaker: DrAmor NADJI(SOLEIL)
        Slides
      • 11
        BAPS lattice design
        Speaker: Gang Xu(Institute of High Energy Physics, CAS)
        Slides
      • 12
        Discussion
    • 12:15
      Lunch
    • Session 3: Accelerator Physics (part 1)
      Convener: Pantaleo Raimondi
      • 13
        Collective effects in USRs
        Speaker: Karl Bane(SLAC National Accelerator Laboratory)
        Slides
      • 14
        Single and multiple Touschek scattering in low emittance rings
        Speaker: DrManuela Boscolo(INFN)
        Slides
      • 15
        BAPS CSR, impedance and IBS
        Speakers: MsNa Wang(Institute of High Energy Physics, CAS), MrSaike Tian(Institute of High Energy Physics, CAS)
        Slides
      • 16
        Propagation of ultra-short bunches in USRs and potential lasing
        Speaker: Robert Hettel(SLAC NAL)
        Slides
      • 17
        Optimal RF frequency
        Speaker: Prof.Mikael Eriksson(MAX-lab)
        Slides
      • 18
        Discussion
    • 15:30
      Coffee break
    • Session 4: Accelerator Engineering (part 1)
      Convener: Prof.Mikael Eriksson(MAX-lab)
      • 19
        Some engineering challenges for a USR machine
        Speaker: DrLin ZHANG(ESRF)
        Slides
      • 20
        Anticipated limits on machine stability and consequences on machine and beamline designs
        Speaker: MrJean-Claude DENARD(Synchrotron SOLEIL)
        Slides
      • 21
        MAX-IV magnet design
        Speaker: MrMartin Johansson(MAX IV Laboratory)
        Slides
      • 22
        High Gradient Magnet Design
        Speaker: DrKouichi Soutome(JASRI/SPring-8)
        Slides
      • 23
        Design and fabrication of NSLS-II sextupole
        Speaker: DrWen Kang(Institute of High Energy Physics, CAS)
        Slides
      • 24
        Design for high precision small aperture magnets for BAPS
        Speaker: DrFusan Chen(Institute of High Energy Physics, CAS)
        Slides
      • 25
        Discussion
    • 18:30
      Dinner
  • Wednesday 31 October
    • Session 1: Lattice Design (part 3)
      Convener: Jiuqing Wang(Institute of High Energy Physics, CAS)
      • 26
        Compact low emittance lattice including superbends
        Speaker: Lin Liu(Brazilian Synchrotron Light Laboratory)
        Slides
      • 27
        PEP-X design
        Speaker: DrMichael Borland(Argonne National Laboratory)
        Slides
      • 28
        Tevatron USR and other topics of USR
        Speaker: DrMichael Borland(Argonne National Laboratory)
        Slides
      • 29
        Overview of optics correction at Diamond and plan for DLS-II
        Speaker: Riccardo Bartolini(Diamond and JAI)
        Slides
      • 30
        Round beam experience at BINP
        Speaker: DrE. Levichev(INP)
        Slides
      • 31
        Discussion
    • 10:15
      Coffee break
    • Session 2: Accelerator Physics (part 2)
      Convener: Qing Qin(Institute of High Energy Physics, CAS)
      • 32
        Optimization of dynamic aperture for the ESRF upgrade
        Speaker: MrAndrea Franchi(ESRF)
        Slides
      • 33
        Coupling correction at SLS, minimum vertical emittance
        Speaker: Prof.Leonid Rivkin(Paul Scherrer Institut)
        Slides
      • 34
        2-frequency RF system for short bunches at SPring-8
        Speaker: Mrtakahiro fujita(SPring-8)
        Slides
      • 35
        Discussion
    • 12:00
      Lunch
    • Session 3: Injection (part 1)
      Convener: DrZhentang Zhao(Shanghai Institute of Applied Physics,CAS)
      • 36
        Top – up injection
        Speaker: Prof.Leonid Rivkin(Paul Scherrer Institut)
        Slides
      • 37
        Injection into low-lifetime USRs
        Speaker: Robert Hettel(SLAC NAL)
        Slides
      • 38
        Pulsed sextupole injection for MAX-IV
        Speaker: DrSimon Leemann(MAX IV Laboratory)
        Slides
    • Session 4: Injection (part 2)
      Convener: Robert Hettel(SLAC NAL)
      • 39
        Pulsed sextupole injection for BAPS
        Speaker: MrYi Jiao(Institute of High Energy Physics, CAS)
        Slides
      • 40
        Injection scheme for the SPring-8 upgrade
        Speaker: DrKouichi Soutome(JASRI/SPring-8)
        Slides
      • 41
        On-axis swap-out injection
        Speaker: DrMichael Borland(Argonne National Laboratory)
        Slides
      • 42
        Discussion
    • 16:00
      Coffee break
    • Session 5: Accelerator Engineering (part 2)
      Convener: Huamin Qu(Institute of High Energy Physics, CAS)
      • 43
        MAX-IV vacuum chamber design
        Speaker: MrsEshraq Al-Dmour(Vacuum group coordinator)
        Slides
      • 44
        Single non-linear injection kicker magnet
        Speaker: MrOlaf Dressler(Helmholtz-Zentrum Berlin)
        Slides
      • 45
        Fast pulsed power supply for ILC damping ring kicker
        Speaker: DrJinhui Chen(Institute of High Energy Physics, CAS)
        Slides
      • 46
        Ground vibration for BAPS
        Speaker: MrDaheng Ji(Institute of High Energy Physics, CAS)
        Slides
      • 47
        Discussion
    • 18:30
      Banquet
  • Thursday 1 November
    • Session 1: Instrumentation and Feedback
      Convener: Prof.Jianshe Cao(Institute of High Energy Physics, CAS)
      • 48
        SOLEIL orbit feedback systems and photon BPMs
        Speaker: MrJean-Claude DENARD(Synchrotron SOLEIL)
        Slides
      • 49
        Multi-Bunch Feedback System in USR
        Speaker: Mrtakahiro fujita(SPring-8)
        Slides
      • 50
        Feedback system for USRs
        Speaker: DrChristoph Steier(Lawrence Berkeley National Laboratory)
        Slides
      • 51
        Discussion
    • Session 2: Insertion Devices
      Convener: MrRodney Gerig(Argonne)
      • 52
        IDs for the ESRF upgrade
        Speaker: DrJoel CHAVANNE(European Synchrotron Radiation Facility)
        Slides
      • 53
        Superconducting IDs at BINP
        Speaker: DrKonstantin Zolotarev
        Slides
      • 10:15
        Coffee break
      • 54
        IDs for Shanghai Synchrotron Radiation Facility
        Speaker: DrQiaogen Zhou(Shanghai Institute of Applied Physics, CAS)
        Slides
      • 55
        PETRA-III damping wiggler experience
        Speaker: MrAlexander Kling(DESY Hamburg)
        Slides
      • 56
        Undulator technology for USR
        Speaker: MrMark Jaski(Argonne National Laboratory)
        Slides
      • 57
        Cryogenic permanent magnet and superconducting small period undulators
        Speaker: DrJohannes Bahrdt(Helmholtz-Zentrum Berlin)
        Slides
      • 58
        Discussion
    • 12:30
      Lunch
Baidu
map