Workshop on Accelerator R&D for Ultimate Storage Rings

→Asia/Shanghai
Qing Qin(IHEP),Robert Hettel(SLAC)
Description
Storage ring-based light sources will continue to play a vital role in X-ray science into the future since they offer beam properties that are complementary to FEL sources. Ring-based sources provide highly stable photon beams having low peak brightness with high average brightness and pulse repetition rate, photons that do not over-excite or damage samples the way those from FELs do, and they serve a large number of diverse users simultaneously. There are now emerging scientific applications and experimental methods that would greatly benefit from ring-based sources having much higher brightness and transverse coherence than present or near-future storage ring facilities – storage rings having electron emittance < ~100 pm-rad in both transverse planes – on the scale of the diffraction limited emittance for hard X-rays. Several institutions world-wide are now including the prospect of building diffraction-limited “ultimate” storage rings (USRs) in their 10-year development plans. These machines push the state of the art for storage ring accelerator and photon beam line design, presenting many significant challenges that must be addressed with R&D.
Participants
  • Tuesday 30 October
    • 08:30→09:35
      Welcome and Introduction Session
      Convener: Xiaoming Jiang(Institute of High Energy Physics, CAS)
      • 08:30
        Welcome 10m
        Speaker: Prof.Yifang Wang(Institute of High Energy Physics, CAS)
        Slides
      • 08:40
        Workshop charge 10m
        Speaker: DrQing Qin(Institute of High Energy Physics, CAS)
        Slides
      • 08:50
        Scientific cases for USR 15m
        Speaker: Prof.Hong Ding(Institute of Physics, CAS)
      • 09:05
        Highlights of science of USR 15m
        Speaker: Prof.Yuhui Dong(Institute of High Energy Physics, CAS)
        Slides
      • 09:20
        Overview of USR design and performance requirements 15m
        Speaker: Robert Hettel(SLAC NAL)
        Slides
    • 09:35→10:35
      Session 1: Lattice Design (part 1)
      Convener: Gang Xu(Institute of High Energy Physics, CAS)
      • 09:35
        MAX-IV project and MBA with higher multipoles 20m
        Speaker: DrSimon Leemann(MAX IV Laboratory)
        Slides
      • 09:55
        Latest development of ESRF and future plan 20m
        Speaker: DrPantaleo Raimondi(ESRF)
        Slides
      • 10:15
        Lattice design for Spring-8 II 20m
        Speaker: DrYoshito Shimosaki(JASRI / SPring-8)
        Slides
    • 10:35→10:50
      Group photo and Coffee break 15m
    • 10:50→12:15
      Session 2: Lattice Design (part 2)
      Convener: Haruo Ohkuma(Spring-8)
      • 10:50
        USR upgrade for ALS 17m
        Speaker: DrChristoph Steier(Lawrence Berkeley National Laboratory)
        Slides
      • 11:07
        Study of lower emittance lattice at SOLEIL 17m
        Speaker: DrAmor NADJI(SOLEIL)
        Slides
      • 11:24
        BAPS lattice design 20m
        Speaker: Gang Xu(Institute of High Energy Physics, CAS)
        Slides
      • 11:44
        Discussion 31m
    • 12:15→13:30
      Lunch 1h 15m
    • 13:30→15:30
      Session 3: Accelerator Physics (part 1)
      Convener: Pantaleo Raimondi
      • 13:30
        Collective effects in USRs 20m
        Speaker: Karl Bane(SLAC National Accelerator Laboratory)
        Slides
      • 13:50
        Single and multiple Touschek scattering in low emittance rings 20m
        Speaker: DrManuela Boscolo(INFN)
        Slides
      • 14:10
        BAPS CSR, impedance and IBS 20m
        Speakers: MsNa Wang(Institute of High Energy Physics, CAS), MrSaike Tian(Institute of High Energy Physics, CAS)
        Slides
      • 14:30
        Propagation of ultra-short bunches in USRs and potential lasing 20m
        Speaker: Robert Hettel(SLAC NAL)
        Slides
      • 14:50
        Optimal RF frequency 15m
        Speaker: Prof.Mikael Eriksson(MAX-lab)
        Slides
      • 15:05
        Discussion 25m
    • 15:30→15:45
      Coffee break 15m
    • 15:45→18:20
      Session 4: Accelerator Engineering (part 1)
      Convener: Prof.Mikael Eriksson(MAX-lab)
      • 15:45
        Some engineering challenges for a USR machine 20m
        Speaker: DrLin ZHANG(ESRF)
        Slides
      • 16:05
        Anticipated limits on machine stability and consequences on machine and beamline designs 20m
        Speaker: MrJean-Claude DENARD(Synchrotron SOLEIL)
        Slides
      • 16:25
        MAX-IV magnet design 20m
        Speaker: MrMartin Johansson(MAX IV Laboratory)
        Slides
      • 16:45
        High Gradient Magnet Design 15m
        Speaker: DrKouichi Soutome(JASRI/SPring-8)
        Slides
      • 17:00
        Design and fabrication of NSLS-II sextupole 15m
        Speaker: DrWen Kang(Institute of High Energy Physics, CAS)
        Slides
      • 17:15
        Design for high precision small aperture magnets for BAPS 15m
        Speaker: DrFusan Chen(Institute of High Energy Physics, CAS)
        Slides
      • 17:30
        Discussion 30m
    • 18:30→19:30
      Dinner 1h
  • Wednesday 31 October
    • 08:00→10:15
      Session 1: Lattice Design (part 3)
      Convener: Jiuqing Wang(Institute of High Energy Physics, CAS)
      • 08:00
        Compact low emittance lattice including superbends 20m
        Speaker: Lin Liu(Brazilian Synchrotron Light Laboratory)
        Slides
      • 08:20
        PEP-X design 20m
        Speaker: DrMichael Borland(Argonne National Laboratory)
        Slides
      • 08:40
        Tevatron USR and other topics of USR 20m
        Speaker: DrMichael Borland(Argonne National Laboratory)
        Slides
      • 09:00
        Overview of optics correction at Diamond and plan for DLS-II 20m
        Speaker: Riccardo Bartolini(Diamond and JAI)
        Slides
      • 09:20
        Round beam experience at BINP 17m
        Speaker: DrE. Levichev(INP)
        Slides
      • 09:37
        Discussion 38m
    • 10:15→10:30
      Coffee break 15m
    • 10:30→12:00
      Session 2: Accelerator Physics (part 2)
      Convener: Qing Qin(Institute of High Energy Physics, CAS)
      • 10:30
        Optimization of dynamic aperture for the ESRF upgrade 20m
        Speaker: MrAndrea Franchi(ESRF)
        Slides
      • 10:50
        Coupling correction at SLS, minimum vertical emittance 20m
        Speaker: Prof.Leonid Rivkin(Paul Scherrer Institut)
        Slides
      • 11:10
        2-frequency RF system for short bunches at SPring-8 15m
        Speaker: Mrtakahiro fujita(SPring-8)
        Slides
      • 11:25
        Discussion 20m
    • 12:00→13:30
      Lunch 1h 30m
    • 13:30→14:30
      Session 3: Injection (part 1)
      Convener: DrZhentang Zhao(Shanghai Institute of Applied Physics,CAS)
      • 13:30
        Top – up injection 20m
        Speaker: Prof.Leonid Rivkin(Paul Scherrer Institut)
        Slides
      • 13:50
        Injection into low-lifetime USRs 20m
        Speaker: Robert Hettel(SLAC NAL)
        Slides
      • 14:10
        Pulsed sextupole injection for MAX-IV 20m
        Speaker: DrSimon Leemann(MAX IV Laboratory)
        Slides
    • 14:30→16:00
      Session 4: Injection (part 2)
      Convener: Robert Hettel(SLAC NAL)
      • 14:30
        Pulsed sextupole injection for BAPS 20m
        Speaker: MrYi Jiao(Institute of High Energy Physics, CAS)
        Slides
      • 14:50
        Injection scheme for the SPring-8 upgrade 20m
        Speaker: DrKouichi Soutome(JASRI/SPring-8)
        Slides
      • 15:10
        On-axis swap-out injection 20m
        Speaker: DrMichael Borland(Argonne National Laboratory)
        Slides
      • 15:30
        Discussion 30m
    • 16:00→16:15
      Coffee break 15m
    • 16:15→18:00
      Session 5: Accelerator Engineering (part 2)
      Convener: Huamin Qu(Institute of High Energy Physics, CAS)
      • 16:15
        MAX-IV vacuum chamber design 20m
        Speaker: MrsEshraq Al-Dmour(Vacuum group coordinator)
        Slides
      • 16:35
        Single non-linear injection kicker magnet 20m
        Speaker: MrOlaf Dressler(Helmholtz-Zentrum Berlin)
        Slides
      • 16:55
        Fast pulsed power supply for ILC damping ring kicker 20m
        Speaker: DrJinhui Chen(Institute of High Energy Physics, CAS)
        Slides
      • 17:15
        Ground vibration for BAPS 15m
        Speaker: MrDaheng Ji(Institute of High Energy Physics, CAS)
        Slides
      • 17:30
        Discussion 30m
    • 18:30→20:00
      Banquet 1h 30m
  • Thursday 1 November
    • 08:00→09:35
      Session 1: Instrumentation and Feedback
      Convener: Prof.Jianshe Cao(Institute of High Energy Physics, CAS)
      • 08:00
        SOLEIL orbit feedback systems and photon BPMs 25m
        Speaker: MrJean-Claude DENARD(Synchrotron SOLEIL)
        Slides
      • 08:25
        Multi-Bunch Feedback System in USR 20m
        Speaker: Mrtakahiro fujita(SPring-8)
        Slides
      • 08:45
        Feedback system for USRs 20m
        Speaker: DrChristoph Steier(Lawrence Berkeley National Laboratory)
        Slides
      • 09:05
        Discussion 30m
    • 09:35→12:30
      Session 2: Insertion Devices
      Convener: MrRodney Gerig(Argonne)
      • 09:35
        IDs for the ESRF upgrade 20m
        Speaker: DrJoel CHAVANNE(European Synchrotron Radiation Facility)
        Slides
      • 09:55
        Superconducting IDs at BINP 20m
        Speaker: DrKonstantin Zolotarev
        Slides
      • 10:15
        Coffee break 15m
      • 10:30
        IDs for Shanghai Synchrotron Radiation Facility 20m
        Speaker: DrQiaogen Zhou(Shanghai Institute of Applied Physics, CAS)
        Slides
      • 10:50
        PETRA-III damping wiggler experience 20m
        Speaker: MrAlexander Kling(DESY Hamburg)
        Slides
      • 11:10
        Undulator technology for USR 20m
        Speaker: MrMark Jaski(Argonne National Laboratory)
        Slides
      • 11:30
        Cryogenic permanent magnet and superconducting small period undulators 20m
        Speaker: DrJohannes Bahrdt(Helmholtz-Zentrum Berlin)
        Slides
      • 11:50
        Discussion 40m
    • 12:30→13:30
      Lunch 1h
    • 13:30→17:30
      Closing Session
Baidu
map