Chinese Physics C > 2007, Vol. 31 > Issue(1): 96-100

Research and Measurement of BPM System at HLS LINAC

National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China

Abstract
HTML
Reference
Related

PDF

Abstract：
BPM system newly designed at HLS Linac has been installed and applied in beam based experiments. This paper introduces the structure of BPM system, signal processing module, mapping results and measurement results of beam based experiment. The BPM system has a dynamic range of not less than 40dBm, beam position resolution of less than 100μm, horizontal sensitivity of 1.61dB/mm and vertical sensitivity of 1.51dB/mm. The results of experiment between corrector strength and BPM shows that the newly designed BPM system can acquire the beam positions information correctly, and the horizontal and vertical correction coefficients of the correctors are 0.46mm/A and 0.58mm/A respectively, and the horizontal and vertical beam positions at BPM are 0.83mm and －0.57mm respectively with the default value of correctors.

[1]	ZHANG Meng,PENG Shi-Xiang,SONG Zhi-Zhong,ZHAO Jie,XU Rong,YUAN Zhong-Xi,GUO Zhi-Yu,LU Yuan-Rong,YU Jin-Xiang. Experimental Results of an ECR Oxygen Source and a LEBT System for 1MeV ISR RFQ Accelerator Upgrade Project. Chinese Physics C, 2008, 32(S1): 220-222.
[2]	HUANG Guo-Qing,YE Kai-Rong. Beam Measurement Using Digital Technology. Chinese Physics C, 2008, 32(S1): 142-144.
[3]	ZHAO Ming-Hua,LIN Guo-Qiang,ZHONG Shao-Peng,WANG Bao-Liang,ZHANG Jun-Qiang,LIU Wei-Hong,ZHOU Wei-Min,CHENG Yong-Zhong. Design and Commissioning of a 150MeV Linac for SSRF. Chinese Physics C, 2008, 32(S1): 244-246.
[4]	LIU Wei-Bin,WANG Shu-Hong,YE Qiang,WANG Lin. Emittance Measurement at BEPCⅡ Linac. Chinese Physics C, 2008, 32(S1): 86-88.
[5]	HOU Mi,PEI Guo-Xi,. Modeling of the RF System for the Normal Conducting Linac. Chinese Physics C, 2008, 32(1): 56-59.doi:10.1088/1674-1137/32/1/013
[6]	CAO Yong,SUN Bao-Gen,HE Duo-Hui,LI Jian-Wei,LI Chuan,XUAN Ke,WANG Ji-Gang,LU Ping. Measurement and Analysis of Movement of BPM Vacuum Chamber for HLS. Chinese Physics C, 2008, 32(S1): 127-129.
[7]	DAI Zhi-Yong,ZHANG Wen-Wei,XIE Yu-Tong,LI Hong,ZHANG Kai-Zhi,ZHANG Lin-Wen,LI Wei-Feng,LIU Cheng-Jun,DENG Jian-Jun,DING Bo-Nan. Development of Beam Transport System of “Dragon-Ⅰ”LIA. Chinese Physics C, 2007, 31(4): 395-399.
[8]	HOU Mi,GENG Zhe-Qiao. Construction of the Phasing System for BEPCⅡ Linac. Chinese Physics C, 2007, 31(4): 391-394.
[9]	WEN Yong-Wu,WEN Xu,LIU Jian-Xin. Microwave System of Medical Standing Electron Linear Accelerator. Chinese Physics C, 2007, 31(7): 683-685.
[10]	SUN Bao-Gen,ZHENG Pu,LU Ping,XU Hong-Liang,WANG Jun-Hua,WANG Ji-Gang,WANG Bao-Yun. Development of New Beam Profile and Emittance Measurement System for HLS. Chinese Physics C, 2006, 30(8): 792-796.
[11]	ZHAO Feng-Li,HOU Mi,ZHAO Yan-Ping,LIU Jin-Tong,ZHANG Jing-Ru,ZHOU Yao-Xiang,HAN Da-Wei. Microwave System for BEPCⅡ-Linac. Chinese Physics C, 2006, 30(2): 155-158.
[12]	GEN Zhe-Qiao,HOU Mi,PEI Guo-Xi. PAD Design for the Phasing System of BEPCⅡ Linac. Chinese Physics C, 2006, 30(2): 151-154.
[13]	GU Peng-Da,GEN Zhe-Qiao,CUI Yan-Yan,PEI Guo-Xi,WANG Shu-Hong. Design Studies of RF Phasing System for BEPCII Linac. Chinese Physics C, 2005, 29(3): 316-320.
[14]	WANG Jun-Hua,LIU Jian-Hong,SUN Bao-Gen,LI Wei-Min,LIU Zu-Ping,YANG Yong-Liang. Calibration of Turn-by-Turn System of HLS and Its Application. Chinese Physics C, 2004, 28(5): 544-548.
[15]	HU Chun-Liang. Beam-Based Calibration System of BPM Offset on BEPC. Chinese Physics C, 2004, 28(2): 200-204.
[16]	SHANG Lei,LUO Xue-Fang,WANG Wei,HONG Jun,LU Ye-Ming,ZHANG Yi,ZHAO Feng. Design and Upgrading of HLS Linac Modulators. Chinese Physics C, 2003, 27(12): 1133-1137.
[17]	SUN Bao-Gen,LU Ping,HE Duo-Hui,XU Hong-Liang,WANG Jun-Hua,GUO Cong-Liang,HONG Jun,LIU Jian-Hong. Development of New DCCT System for Hefei Light Source. Chinese Physics C, 2003, 27(2): 169-172.
[18]	GU Peng-Da,PEI Guo-Xi,WANG Shu-Hong. SLED System for Long Pulse Multi-bunch Linac. Chinese Physics C, 2001, 25(4): 348-353.
[19]	YU Qing-Chang. Study on Design of Proton Linacs. Chinese Physics C, 2001, 25(5): 429-436.
[20]	WEI Kai-Yu,LIN Zhen-Hua,LÜ Ji-Hua,WANG Shu-Hong,LUO Zi-Hua,SUN Song-Lan,ZHU Ren-Quan. DESIGN AND BEAM TEST FOR THE BPL 35.5MeV BEAM TRANSPORT SYSTEM. Chinese Physics C, 1987, 11(4): 571-576.

Access

Get Citation

LI Ji-Hao, SUN Bao-Gen, HE Duo-Hui, LIU Gong-Fa, LU Ping and CAO Yong. Research and Measurement of BPM System at HLS LINAC[J]. Chinese Physics C, 2007, 31(1): 96-100.

LI Ji-Hao, SUN Bao-Gen, HE Duo-Hui, LIU Gong-Fa, LU Ping and CAO Yong. Research and Measurement of BPM System at HLS LINAC[J]. Chinese Physics C, 2007, 31(1): 96-100. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2006-03-20
Revised: 2006-04-14

Article Metric

Article Views(6137)
PDF Downloads(821)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Research and Measurement of BPM System at HLS LINAC

Corresponding author:LI Ji-Hao,

National Synchrotron Radiation Laboratory, University of Science and Technology of China, Hefei 230029, China

Received Date:2006-03-20
Accepted Date:2006-04-14
Available Online:2007-01-05

Abstract:BPM system newly designed at HLS Linac has been installed and applied in beam based experiments. This paper introduces the structure of BPM system, signal processing module, mapping results and measurement results of beam based experiment. The BPM system has a dynamic range of not less than 40dBm, beam position resolution of less than 100μm, horizontal sensitivity of 1.61dB/mm and vertical sensitivity of 1.51dB/mm. The results of experiment between corrector strength and BPM shows that the newly designed BPM system can acquire the beam positions information correctly, and the horizontal and vertical correction coefficients of the correctors are 0.46mm/A and 0.58mm/A respectively, and the horizontal and vertical beam positions at BPM are 0.83mm and －0.57mm respectively with the default value of correctors.