Chinese Physics C > 2008, Vol. 32 > Issue(S2): 232-234

Research on the delay-line readout for GEM detectors

ZHOU Yi^,,
LI Cheng

Abstract
HTML
Reference
Related

PDF

Abstract：

Based on the principles of transmission line and the output signal of GEM detector, a full simulation model of delay-line circuit has been described in this paper. The consistency of simulation results and experimental data shows that the method is very effective for the design of delay-line readout.

References

[1]

. Sauli F. Nucl. Instrum. Methods A, 1997, 386: 5312. Sauli F. Nucl. Instrum. Methods A, 2003, 505: 1953. Bachmann S, Bressan A et al. Nucl. Instrum. Methods A,1999, 438: 3764. ZHOU Yi, LI Cheng et al. HEP NP, 2004, 28(3): 299(in Chinese)5. LI Cheng et al. HEP NP, 2005, 29(1): 68-71(in Chinese)6. Guedes G P et al. Nuclear Instruments and Methods inPhysics Research A, 2003, 513: 4737. Sim Power System User's Guide, Simulink User's Guide,Mathworks8. 2D Extractor, Ansoft corporation

Access

Get Citation

ZHOU Yi and LI Cheng. Research on the delay-line readout for GEM detectors[J]. Chinese Physics C, 2008, 32(S2): 232-234.

ZHOU Yi and LI Cheng. Research on the delay-line readout for GEM detectors[J]. Chinese Physics C, 2008, 32(S2): 232-234. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2008-07-17
Revised: 1900-01-01

Article Metric

Article Views(4114)
PDF Downloads(667)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Research on the delay-line readout for GEM detectors

ZHOU Yi^,
LI Cheng

Corresponding author:ZHOU Yi,

Received Date:2008-07-17
Accepted Date:1900-01-01
Available Online:2008-01-03

Abstract:

Based on the principles of transmission line and the output signal of GEM detector, a full simulation model of delay-line circuit has been described in this paper. The consistency of simulation results and experimental data shows that the method is very effective for the design of delay-line readout.