Chinese Physics C > 2004, Vol. 28 > Issue(7): 762-766

Development and Measurements of a Technological Cavity for 350MHz High Current Proton RFQ

Institute of Heavy Ion Physics,Peking University,Beijing 100871,China2 Institute of High Energy Physics,CAS,Beijing 100039,China

Abstract
HTML
Reference
Related

PDF

Abstract：
A full-dimension oxygen-free-copper technological cavity was developed for the study on the design and the technological process of a high-current proton RFQ. The physical and mechanical design, machining and brazing technological studies, and RF performance measurements and tuning were introduced. An ideal field distribution could be reached by tuning cavity, whose consistence and smoothness of the field distributions in the four quadrants meet the demands of use. Its dipole components are small enough, too.

References

[1]

. CHEN Jia-Er, FANG Jia-Xun. Progress of Natural Sciences, 2001, 11(11) : 1121 (陈佳洱，方家驯自然科学进展，2001,11 (11): 1121)2. Schneider J D. Overview of High Power CW Proton Accelerators. Proc.of EPAC 2000. 1183. Lagniel J M. High Power Proton Linac for a Multiuser Facility. Proc. of EPAC 2000. 9454. GUAN Xia-Ling, FU Shi-Nian, FANG Jia-Xun et al. The Activit ies ofHPPA Technology Relat ed to ADS in China. Proc. of APAC 2001. 138.5. Smith H V et al . Commissioning Results from the LEDA RFQ. Proc. ofEPAC 2000. 9696. FU Shi-Nian, GUAN Xia-Ling, OUYANG Hua-Fu et al. RD St atus ofa 3.5MeV RFQ Accelerator for ADS Study in China. Proc. of Linac2002. 1557. FU Shi-Nian. HEP NP, 2002, 26(7) : 735 (傅世年.高能物理与核物理，2002,26(7):735)

[1]	ZHANG Meng,PENG Shi-Xiang,SONG Zhi-Zhong,ZHAO Jie,XU Rong,YUAN Zhong-Xi,GUO Zhi-Yu,LU Yuan-Rong,YU Jin-Xiang. Experimental Results of an ECR Oxygen Source and a LEBT System for 1MeV ISR RFQ Accelerator Upgrade Project. Chinese Physics C, 2008, 32(S1): 220-222.
[2]	BI Yuan-Jie,ZHANG Tian-Jue,JI Bin,YAO Hong-Juan,AN Shi-Zhong,XING Jian-Sheng,TANG Chuan-Xiang. Research on RF Cavity Tolerance of CYCIAE-100. Chinese Physics C, 2008, 32(S1): 163-165.
[3]	LIU Wei,GUO Zhi-Yu,YAN Xue-Qing,LU Yuan-Rong,ZHU Kun,GAO Shu-Li,FANG Jia-Xun,R.A.Jameson,CHEN Jia-Er. Optimization Study of the 1MeV RFQ at Peking University. Chinese Physics C, 2007, 31(8): 783-786.
[4]	PENG Shi-Xiang,SONG Zhi-Zhong,QIAN Feng,YUAN Zhong-Xi,XU Rong,YU Jin-Xiang,GUO Zhi-Yu. An ECR Oxygen Source and a LEBT System Developed for 1 MeV ISR RFQ Accelerator Upgrade. Chinese Physics C, 2007, 31(S1): 63-65.
[5]	ZHANG Tian-Jue,LI Zhen-Guo,CHU Cheng-Jie,WANG Xiu-Long,ZHOU Zheng-He. 100 MeV High Intensity Proton Cyclotron as a Driving Accelerator for Radioactive Ion Beam Facility. Chinese Physics C, 2006, 30(S1): 159-161.
[6]	YAO Hong-Juan,ZHANG Tian-Jue,JIA Xian-Lu,GUAN Feng-Ping,WEI Su-Min,LV Yin-Long,LIN Yu-Zheng. Physics Design For Axial Injection System and Central Region of 100MeV High Intensity Cyclone. Chinese Physics C, 2006, 30(S1): 141-143.
[7]	GUO Zhi-Yu,XIE Yi,LIU Ke-Xin,FANG Jia-Xun,YANG Xue-Qing,CHEN Jia-Rong. Physical Design of A Low-Energy-Spread RFQ Accelerator. Chinese Physics C, 2006, 30(S1): 114-116.
[8]	YANG Xue-Qing,FANG Jia-Xun,GUO Zhi-Yu,CHEN Jia-Rong. Matching Design Method for High Intensity RFQ Accelerators. Chinese Physics C, 2006, 30(S1): 19-21.
[9]	ZHU Feng,QUAN Sheng-Wen,ZHAO Kui,CHEN Jia-Er. Study on High Order Modes of a β=0.45,f=350MHz Spoke Cavity. Chinese Physics C, 2006, 30(10): 1006-1009.
[10]	FU Shi-Nian,OUYANG Hua-Fu,XU Tao-Guang. Study on the Function of Dipole Stabilizer Rods in an RFQ Accelerator. Chinese Physics C, 2005, 29(3): 295-300.
[11]	ZHU Kun,GUO Zhi-Yu,FANG Jia-Xun,GUO Jiu-Fang. The Design and Simulation of a Cooling System of High Current 4-rod RFQ Cavity. Chinese Physics C, 2005, 29(8): 797-801.
[12]	OUYANG Hua-Fu,FANG Shou-Xian. The Model study on the Resonant Phenomena in Low Energy Proton Circular Accelerators with Intense Beams. Chinese Physics C, 2005, 29(2): 186-190.
[13]	ZHU Feng,QUAN Sheng-Wen,WANG Li-Fang,ZHAO Kui,CHEN Jia-Rong. Design of a β=0.45, f=350 MHz Spoke Cavity. Chinese Physics C, 2005, 29(1): 77-80.
[14]	XING Qing-Zi,FU Shi-Nian,LIN Yu-Zheng,FANG Shou-Xian. Calculation of Beam Acceptance for RFQ Accelerators. Chinese Physics C, 2003, 27(7): 628-632.
[15]	REN XiaoTang,Lu YuanRong,YU JinXiang,WANG ZhongYi,LI WeiGuo,GUO JuFang,SONG ZhiZhong,LI YuSong,FANG JiaXun,CHEN JiaEr. Experimental Research on Simultaneous Acceleration of Positive and Negative Ions with Equal q/m in an ISR RFQ. Chinese Physics C, 2000, 24(4): 347-351.
[16]	GUO WeiMing,YU QingChang. Design Study of a Injector of Proton Accelerator 714MHz RFQ. Chinese Physics C, 2000, 24(3): 262-268.
[17]	Luo Zihua,Wang Shuhong. Design and Study of Beam Dynamics for the BPL-RFQ. Chinese Physics C, 1995, 19(7): 658-666.
[18]	WANG Shu-Hong. RFQ's Beam Dynamics and RF Structure. Chinese Physics C, 1993, 17(4): 310-321.
[19]	LOU ZI-HUA. REDUCTION OF THE BEAM ENERGY SPREAD OF RFQ BY DEBUNCHER. Chinese Physics C, 1982, 6(4): 507-511.
[20]	LUO ZI-HUA,LUO YING-XIONG,WANG LIN-LIN. STUDY OF THE BEAM TRAMSVERSE MOTION IN THE RFQ STRUCTURE. Chinese Physics C, 1982, 6(6): 688-696.

Access

Get Citation

GUO Zhi-Yu, FANG Jia-Xun, GUO Ju-Fang, LI Wei-Guo, YU Mao-Lin, GAO Shu-Li, GUAN Xia-Ling, FU Shi-Nian, OUYANG Hua-Fu, XU Wen-Wu and XU Tao-Guang. Development and Measurements of a Technological Cavity for 350MHz High Current Proton RFQ[J]. Chinese Physics C, 2004, 28(7): 762-766.

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2003-11-13
Revised: 1900-01-01

Article Metric

Article Views(4367)
PDF Downloads(623)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Development and Measurements of a Technological Cavity for 350MHz High Current Proton RFQ

Corresponding author:GUO Zhi-Yu,

Institute of Heavy Ion Physics,Peking University,Beijing 100871,China2 Institute of High Energy Physics,CAS,Beijing 100039,China

Received Date:2003-11-13
Accepted Date:1900-01-01
Available Online:2004-07-05

Abstract:A full-dimension oxygen-free-copper technological cavity was developed for the study on the design and the technological process of a high-current proton RFQ. The physical and mechanical design, machining and brazing technological studies, and RF performance measurements and tuning were introduced. An ideal field distribution could be reached by tuning cavity, whose consistence and smoothness of the field distributions in the four quadrants meet the demands of use. Its dipole components are small enough, too.