Chinese Physics C > 2002, Vol. 26 > Issue(4): 423-429

Design and Construction of a Thin Septum Magnet Prototype for Injection of SSRF Storage Ring

Institute of High Energy Physics,Chinese Academy of Science,Beijing 100039,China2 Physics Department,Nanjing University,Nanjing 210093,China

Abstract
HTML
Reference
Related

PDF

Abstract：
According to the storage ring injection requirements of Shanghai Synchrotron Radiation Facility (SSRF),an eddy current septum magnet prototype has been firstly constructed in China. All measured specifications of the magnet are very well satisfied with the requirements of the storage ring injection. In this article,some key issues of the design and construction of the septum magnet are discussed,the measured performances of the septum magnet are given and some constructive suggestions to improve the performance of the septum are proposed.

References

[1]

Lopez F, Mills F, Milton S et al. The APS Thin Pulsed Septum Magnets. 1994, Proc. 4th EPAC: 2406-24082 Rohner F. Magnetic Calculation on the Eddy Current Septum Magnet for the ESRF. 1990, ESRF Internal Note AT/MA/90-083 Kumagai K,Matsui S. IEEE Trans. Magn., 1994, 30(4): 2134-21374 Fabris R, Favari A, Tommasini D. A High Current Passive Septum Magnet for Elettra. 1992, Proc. 2nd EPAC: 1460-14625 KANG Wen, DINC Xiao-Ping, HAN Qian et al. High Energy Phys. and Nucl. Phys., 2001, 25(3): 264-270(in Chinese)(康文, 丁小平, 韩谦等. 高能物理与核物理, 2001, 25(3): 264-270)

[1]	SHEN Li,CHI Yun-Long,HUANG Chuan,TANG Jing-Yu. Design of Injection Painting Bumper Magnets Pulse Power Supply for CSNS/RCS. Chinese Physics C, 2008, 32(S1): 22-24.
[2]	DENG Chang-Dong,CHEN Fu-San,SUN Xian-Jing,CHEN Wan,SUN Yao-Lin,SHI Cai-Tu. CSNS Magnet System and Prototypes Fabrication. Chinese Physics C, 2008, 32(S1): 71-73.
[3]	CHEN Ming,FENG Zi-Qiang,ZHAO Shen-Jie,ZHOU Zu-Sheng,YU Hai-Bo,HOU Hong-Tao,ZHANG Zhi-Gang,MA Guang-Ming,MAO Dong-Qing,MA Zhen-Yu,LIU Jian-Fei. RF Power Sources of the Storage Ring for SSRF. Chinese Physics C, 2008, 32(S1): 197-199.
[4]	HUA Zheng-Dong,XU Xun-Jiang,FANG Ke-Ming,XU Jia-Qiang,WANG Jian-Hua,CAI Jun,LIU Xin. Calculation of Gas Bremsstrahlung Power from Straight Section of Storage Ring at SSRF. Chinese Physics C, 2008, 32(S1): 89-92.
[5]	JIANG Bo-Cheng,LIU Gui-Min,ZHAO Zhen-Tang. Simulation of a Transverse Feedback System for the SSRF Storage Ring. Chinese Physics C, 2007, 31(10): 956-961.
[6]	JIANG Bo-Cheng,ZHAO Zhen-Tang,LIU Gui-Min. Study of Touschek Lifetime in SSRF Storage Ring. Chinese Physics C, 2006, 30(7): 693-698.
[7]	LIU Gui-Min,Dai Zhi-Min,LI Hao-Hu,LIAO Yi,JIANG Bo-Cheng,HOU Jie,ZHAO Zhen-Tang. Lattice Design for SSRF Storage Ring. Chinese Physics C, 2006, 30(S1): 144-146.
[8]	JIANG Bo-Cheng,LIU Gui-Min,Dai Zhi-Min,ZHAO Zhen-Tang. Calculation of Coupling Impedance of the Injection Section for the SSRF Storage Ring. Chinese Physics C, 2006, 30(S1): 22-24.
[9]	KANG Wen,HAO Yao-Dou,HANG Qian,CHEN Jin-Hui. Design and Construction of a New Type Kicker Magnet for Injection of BEPCⅡ Storage Ring. Chinese Physics C, 2005, 29(6): 611-614.
[10]	SHI Cai-Tu,JING Yu-Hui,LI Da-Shi,CHEN Ji,WANG Mo-Tuo,PENG Quan-Ling,PAN Hui-Bao,SHENG Shu-Gang,CAO Yun. Design and Construction of the First In-Vacuum Wiggler. Chinese Physics C, 2004, 28(6): 637-643.
[11]	SHI Cai-Tu,WANG Mo-Tuo,JING Yu-Hui,LI Da-Shi,CHEN Ji,PENG Quan-Ling. Design and Construction of Multipoles Wiggler in BEPC. Chinese Physics C, 2003, 27(S1): 129-133.
[12]	KANG Wen,DING Xiao-Ping,HAN Qian,PANG Jia-Biao,CHEN Sen-Yu. Theoretical Analysis and Computer Simulation of Eddy-Current Septum Magnets. Chinese Physics C, 2001, 25(3): 264-270.
[13]	Wang Jiuqing,Fang Shouxian. Application of the Negahve Momentum CompactionLattice in a Tau-Charm Factory. Chinese Physics C, 1999, 23(4): 388-396.
[14]	Huang Nan,Jin Lihui,Liu Weibin,Wang Dong,Wang Jiuqing,Yu Chenghui. Study of the Lattice Design of BTCF Storage Ring. Chinese Physics C, 1998, 22(12): 1164-1173.
[15]	Jin Yuming. Scaling Law for Lattice Design of a Storage Ring. Chinese Physics C, 1997, 21(1): 75-80.
[16]	Hou Defu,Li Jiarong. Cutting Rules and Imaginary Parts of Thermal Green Functions in Thermofield Dynamics. Chinese Physics C, 1995, 19(10): 891-897.
[17]	HUANG Yong-Zhang,TENG Ke-Jian,XIE Jia-Lin. Design and Fabrication of Alpha Magnet for an Microwave Electron Gun. Chinese Physics C, 1993, 17(9): 790-795.
[18]	PEI Guo-Xi,ZHANG Wu,TIAN Bao-Ying,XU Jian-Ming. THE EDDY-CURRENT EFFECTS OF A BENDING MAGNET ON AN ELECTRON STORAGE RING DURING SLOW ACCELERATION. Chinese Physics C, 1986, 10(5): 578-582.
[19]	CHEN Zhi-Cheng,LIU Jian-Yang,XU Jian-Ming. THE INVESTIGATION OF AN UNDULATOR FOR THE HEFEI 800MeV ELECTRON STORAGE RING. Chinese Physics C, 1986, 10(3): 316-322.
[20]	Chen Jia-er. THE MOTION OF IONS IN RF ION BEAM CHOPPERS. Chinese Physics C, 1980, 4(3): 401-404.

Access

Get Citation

KANG Wen, DING Xiao-Ping, HAN Qian, PANG Jia-Biao and CHEN Sen-Yu. Design and Construction of a Thin Septum Magnet Prototype for Injection of SSRF Storage Ring[J]. Chinese Physics C, 2002, 26(4): 423-429.

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2001-05-23
Revised: 1900-01-01

Article Metric

Article Views(5206)
PDF Downloads(575)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Design and Construction of a Thin Septum Magnet Prototype for Injection of SSRF Storage Ring

Corresponding author:KANG Wen,

Institute of High Energy Physics,Chinese Academy of Science,Beijing 100039,China2 Physics Department,Nanjing University,Nanjing 210093,China

Received Date:2001-05-23
Accepted Date:1900-01-01
Available Online:2002-04-05

Abstract:According to the storage ring injection requirements of Shanghai Synchrotron Radiation Facility (SSRF),an eddy current septum magnet prototype has been firstly constructed in China. All measured specifications of the magnet are very well satisfied with the requirements of the storage ring injection. In this article,some key issues of the design and construction of the septum magnet are discussed,the measured performances of the septum magnet are given and some constructive suggestions to improve the performance of the septum are proposed.