Chinese Physics C > 2007, Vol. 31 > Issue(12): 1116-1121

Thermal Analysis of CSNS RFQ

OUYANG Hua-Fu^,,
YAO Yuan

Accelerator Center, Institute of High Energy Physics, CAS, Beijing 100049, China

Abstract
HTML
Reference
Related

PDF

Abstract：
Water-cooling serves two functions in an RFQ. One is to take away the power dissipated on the inside surface of the RFQ by the RF field to maintain the thermal stability and to limit the deformation of RFQ. The other is to be used to tune the RFQ basically without effecting the field distribution when the RFQ is out of resonance, since the beam transmission of RFQ is very sensitive to the field profile, the ordinary frequency tuning method by the movable tuners is no more adopted in an RFQ operation. The cooling water channel position and number, as well as the optimum cooling water temperature are determined through thermal analysis. In addition, the tuning method by adjusting the cooling water temperature is determined when the RFQ is out of resonance.

References

[1]

. OUYANG Hua-Fu, FU Shi-Nian. Study of CSNS RFQ Design. Linac06, Knoxville, TN, 20062. FU Shi-Nian, GUAN Xia-Ling, FANG Shou-Xian. J. Korean Phys. Soc., 2006, 48(4): S806-8093. OUYANG Hua-Fu, FU Shi-Nian, GUAN Xia-Ling et al.HEP NP, 2004, 28(7): 753-757 (in Chinese) (欧阳华甫, 傅世年, 关遐龄等. 高能物理与核物理, 2004, 28(7): 753-757)4. Dittus F W, Boelter L M K. University of California Berkeley Publications on Engineering, 1930. 4435. McAdams W H. Heat Transmission. 3rd. New York:McGraw-Hill, 19546. Petkhov B S. Advances in Heat Transfer. New York: Academic Press Inc., 1970. 504-564

[1]	Jing Wang,Jian-Long Huang,Xiao-Qi Zhang,Bin Zhang,Yuan He,Zhou-Li Zhang,Ai-Min Shi. Frequency tuning with RFQ temperature in China ADS Injector Ⅱ. Chinese Physics C, 2016, 40(3): 037003.doi:10.1088/1674-1137/40/3/037003
[2]	SHI Ai-Min,SUN Lie-Peng,ZHANG Zhou-Li,XU Xian-Bo,SHI Long-Bo,LI Chen-Xing,WANG Wen-Bin. Design of the new couplers for C-ADS RFQ. Chinese Physics C, 2015, 39(4): 047004.doi:10.1088/1674-1137/39/4/047004
[3]	CHEN Jia-Er,GUO Zhi-Yu,FU Shi-Nian,FANG Jia-Xun,LU Yuan-Rong,YAN Xue-Qing. Studies on RFQ accelerators and its applications. Chinese Physics C, 2009, 33(10): 926-929.doi:10.1088/1674-1137/33/10/019
[4]	WANG Yue,HUANG Wen-Xue,TIAN Yu-Lin,ZHU Zhi-Chao,XU Hu-Shan,XIAO Guo-Qing,ZHAN Wen-Long. Latest progress of the RFQ cooler and buncher RFQ1L. Chinese Physics C, 2008, 32(S2): 222-224.
[5]	ZHANG Meng,PENG Shi-Xiang,SONG Zhi-Zhong,ZHAO Jie,XU Rong,YUAN Zhong-Xi,GUO Zhi-Yu,LU Yuan-Rong,YU Jin-Xiang. Experimental Results of an ECR Oxygen Source and a LEBT System for 1MeV ISR RFQ Accelerator Upgrade Project. Chinese Physics C, 2008, 32(S1): 220-222.
[6]	DENG Chang-Dong,CHEN Fu-San,SUN Xian-Jing,CHEN Wan,SUN Yao-Lin,SHI Cai-Tu. CSNS Magnet System and Prototypes Fabrication. Chinese Physics C, 2008, 32(S1): 71-73.
[7]	PENG Shi-Xiang,SONG Zhi-Zhong,QIAN Feng,YUAN Zhong-Xi,XU Rong,YU Jin-Xiang,GUO Zhi-Yu. An ECR Oxygen Source and a LEBT System Developed for 1 MeV ISR RFQ Accelerator Upgrade. Chinese Physics C, 2007, 31(S1): 63-65.
[8]	J.W.Kwan,R.Gough,R.Keller,B.A.Ludewigt,M.Regis,R.P.Wells,J.H.Vainionpaa. A 2.45 GHz High Current Ion Source for Neutron Production. Chinese Physics C, 2007, 31(S1): 232-235.
[9]	HU Wei,ZHANG Jing,QI Xin. A Digital Control Scheme of Power Supply System for RCS/CSNS. Chinese Physics C, 2007, 31(11): 1062-1066.
[10]	GUO Zhi-Yu,XIE Yi,LIU Ke-Xin,FANG Jia-Xun,YANG Xue-Qing,CHEN Jia-Rong. Physical Design of A Low-Energy-Spread RFQ Accelerator. Chinese Physics C, 2006, 30(S1): 114-116.
[11]	TANG Jing-Yu,QIU Jing,WANG Sheng,WEI Jie. Physics Design and Study of the BSNS RCS Injection System. Chinese Physics C, 2006, 30(12): 1184-1189.
[12]	WANG Sheng,Qin Qing,TANG Jing-Yu,FANG Shou-Xian. The Lattice Design for BSNS Rapid Cycling Synchrotron. Chinese Physics C, 2006, 30(S1): 123-125.
[13]	HUANG Wen-Xue,WANG Yue,XU Hu-Shan,SUN Zhi-Yu,LI Zhan-Kui,XIAO Guo-Qing,ZHAN Wen-Long. Extraction System for RFQ Cooler and Buncher. Chinese Physics C, 2005, 29(8): 802-805.
[14]	OUYANG Hua-Fu,FU Shi-Nian. Tuning and Measuring of RFQ with Resonantly Coupled Segments. Chinese Physics C, 2003, 27(6): 551-554.
[15]	XING Qing-Zi,FU Shi-Nian,LIN Yu-Zheng,FANG Shou-Xian. Calculation of Beam Acceptance for RFQ Accelerators. Chinese Physics C, 2003, 27(7): 628-632.
[16]	OUYANG Hua-Fu,XU Tao-Guang,YU Qing-Chang,GUAN Xia-Ling,LUO Zi-Hua. Analysis of Phase Velocity Designing on Superconducting Section of Proton Linac for Spallation Neutron Source. Chinese Physics C, 2001, 25(11): 1113-1119.
[17]	FAN Sheng,LI ZhuXia. Fragment Mass Distribution of Spallation Reaction Induced by Intermediate Energy Protons. Chinese Physics C, 2000, 24(9): 845-851.
[18]	Xu Chuncheng,Ye Yanlin,Chen Tao,Ying Jun,Ma Jingguo,Liu Hongtao. Study on the Parameters of the Lead Spallation Target. Chinese Physics C, 1999, 23(4): 402-408.
[19]	Huang Xiaolong,Yu Weixiang,Han Xiaogang,Zhao Wenrong,Lu Hanlin,Chen Jinxiang,Shi Zhaomin,Tang Guoyou,Zhang Guohui. The Effect of Low Energy Neutrons From Monoenergetic Neutron Source on Activation Cross Section Measurements. Chinese Physics C, 1998, 22(12): 1074-1081.
[20]	LOU ZI-HUA. REDUCTION OF THE BEAM ENERGY SPREAD OF RFQ BY DEBUNCHER. Chinese Physics C, 1982, 6(4): 507-511.

Access

Get Citation

OUYANG Hua-Fu and YAO Yuan. Thermal Analysis of CSNS RFQ[J]. Chinese Physics C, 2007, 31(12): 1116-1121.

OUYANG Hua-Fu and YAO Yuan. Thermal Analysis of CSNS RFQ[J]. Chinese Physics C, 2007, 31(12): 1116-1121. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2006-12-06
Revised: 2007-01-08

Article Metric

Article Views(4549)
PDF Downloads(848)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Thermal Analysis of CSNS RFQ

OUYANG Hua-Fu^,
YAO Yuan

Corresponding author:OUYANG Hua-Fu,

Accelerator Center, Institute of High Energy Physics, CAS, Beijing 100049, China

Received Date:2006-12-06
Accepted Date:2007-01-08
Available Online:2007-12-05

Abstract:Water-cooling serves two functions in an RFQ. One is to take away the power dissipated on the inside surface of the RFQ by the RF field to maintain the thermal stability and to limit the deformation of RFQ. The other is to be used to tune the RFQ basically without effecting the field distribution when the RFQ is out of resonance, since the beam transmission of RFQ is very sensitive to the field profile, the ordinary frequency tuning method by the movable tuners is no more adopted in an RFQ operation. The cooling water channel position and number, as well as the optimum cooling water temperature are determined through thermal analysis. In addition, the tuning method by adjusting the cooling water temperature is determined when the RFQ is out of resonance.