Chinese Physics C > 2008, Vol. 32 > Issue(S1): 11-14

Stress Analysis of CR Superferric Magnet

Abstract
HTML
Reference
Related

PDF

Abstract：
Finite Element Method is used in this article to analyze the stress of CR superferric magnet. Magnetic force and the stress caused by this force are calculated. The thermal stress and strain of the coil caused by cooling down is also analyzed. The result will be taken as a check for the design of the coil and coilcase, and also as a reference for the optimization of further design and quench protection.

References

[1]

. WU Wei-Yue. Preliminary Design for CR Dipole Coils,IPP.April 5, 20072. CHEN Wen-Ge. Structure Design and Test Analyzing ofToroidal Field Magnet System for Superconducting Toka-mak HT-7U. IPP2002 (in Chinese)( 陈文革. HT-7U超导托克马克核聚变装置纵场磁体结构的设计分析与磁体实验研究, 中国科学院等离子体物理研究所, 2002)3. CHEN Wen-Ge. Journal of Hefei University of Technology,2001, 24 517|522 (in Chinese)(陈文革. 合肥工业大学学报, 2001, 24: 517-522)4. XIE Han. Nuclear Fusion and Plasma Physics, 2005, 25:133-138 (in Chinese)(谢韩. 核聚变与等离子体物理, 2005, 25: 133-138)5. CHENG Ya-Li. Atomic Energy Science and Technology,2006, 5: 595-597 (in Chinese)(程亚丽, 原子能科学技术, 2006, 5: 595-597)

[1]	Muhammad Ikram Shahzad,Zafar Yasin,Gul Sher. Fission studies of gold induced by (1665 MeV) π^-using a CR-39 detector. Chinese Physics C, 2012, 36(2): 132-135.doi:10.1088/1674-1137/36/2/005
[2]	CHEN Lin,ZHOU Liang-Ji,REN Jing,LI Ye,WU Shou-Dong,XIE Wei-Ping,LI Cheng-Gang,JI Ce,DENG Jian-Jun. Characterization of the Rod-Pinch Diode at 1MV as a Radiography Source. Chinese Physics C, 2008, 32(S1): 320-322.
[3]	TANG Bing,CUI Bao-Qun,MA Rui-Gang,MA Ying-Jun,JIANG Chong,CHEN Li-Hua,JIANG Wei-Sheng. Analysis of the Effect of Field Distribution of Chamber in Dipole. Chinese Physics C, 2008, 32(S1): 65-67.
[4]	WU Wei,HE Yuan,MA Li-Zhen,LI Qing,YAO Qing-Gao,BIAN Wen-Long,XIA Jia-Wen. 3D Quench Simulation Using Finite Element Method for CR Superconducting Magnet's Strand. Chinese Physics C, 2008, 32(S1): 15-18.
[5]	YAO Qing-Gao,MA Li-Zhen,HE Yuan,LI Qing,WU Wei,BIAN Wen-Long,YUAN Ping,ZHAN Wen-Long. Optimization of Magnetic Field for CR Dipole Magnet. Chinese Physics C, 2008, 32(S1): 19-21.
[6]	XIA Lian-Sheng,WANG Wen-Dou,MOU Fan,ZHANG Huang,CHEN De-Biao,ZHANG Kai-Zhi,SHI Jin-Shui,DENG Jian-Jun,ZHANG Lin-Wen. Research on Multi-pulsed High Intense Electron Vacuum Diode. Chinese Physics C, 2007, 31(6): 593-596.
[7]	WANG Zhi-Gang,SHAN Li-Min,SHANG Lei,XIE Wen-Jie,QIN Gang,LIU Chun-Xiu,YU Bo-Xiang,DONG Ming-Yi,CAI Xiao,ZHOU Li,XIA Xiao-Mi,LAI Yuan-Fen,WANG Man,,,,. Nuclear Counter Effect of Silicon Photodiode Used in CsI(Tl) Crystal Calorimeter. Chinese Physics C, 2006, 30(9): 876-879.
[8]	WEI Zeng-Quan,XIE Hong-Mei,MEI Man-Tong,ZHUANG Chu-Xiong. Identification Model of Space Heavy Ions by CR-39. Chinese Physics C, 2005, 29(2): 197-200.
[9]	ZHOU Feng-Qun,YI Yan-Ling,TUO Fei,CAO Xue-Xiang,KONG Xiang-Zhong. Measurement of Cross Sections for⁵⁰Cr(n,2n)⁴⁹Cr and⁵²Cr(n,2n)⁵¹Cr Reactions Induced by 13.5—14.6MeV Neutrons. Chinese Physics C, 2005, 29(7): 644-647.
[10]	FU Shi-Nian,OUYANG Hua-Fu,XU Tao-Guang. Study on the Function of Dipole Stabilizer Rods in an RFQ Accelerator. Chinese Physics C, 2005, 29(3): 295-300.
[11]	SU Ya-Long,HE Yuang,HAN Shao-Fei,YUANG Ping,LIU Wei-Jun,MA Li-Zhen,ZHANG Si-Ling,WANG Wen-Jin. Research of Reproducibility of Dipoles for Cooler-Storage-Ring. Chinese Physics C, 2005, 29(5): 491-494.
[12]	HAN Yin-Lu. Theoretical Analysis of Cross Sections for n+⁵²Cr Reaction. Chinese Physics C, 2004, 28(5): 512-515.
[13]	HE Yuan,XIONG Hui,LIU Wei-Jun,HAN Shao-Fei,YUAN Ping,MA Li-Zhen,ZHANG Bin,WANG Wen-Jin,WANG Yue,XIA Jia-Wen. Characteristic of the 60°C-Dipole for CSR. Chinese Physics C, 2003, 27(6): 532-536.
[14]	ZHANG DongQing,CUI MingQi,ZHU PeiPing,ZHAO YiDong,CUI CongWu. Self-calibration of Silicon Photodiode in the Soft X Ray Spectral Range. Chinese Physics C, 2000, 24(6): 578-584.
[15]	He Jingtang,Chen Duanbao,Li Zuhao,Mao Yufang,Dong Xiaoli. Experimental Studies on Using Silicon Photodiode as Read-out Component of CsI (Tl) Crystal. Chinese Physics C, 1996, 20(10): 890-893.
[16]	XI Hong-Fei,ZHANG Wen-Long,GUO Zhong-Yan,ZHOU Jian-Qun,ZHU Yong-Tai,LIU Guan-Hua,FAN En-Jie. Application of CsI(T1) Scintillator With Photodiode Readout Detector in Heavy Ion Reaction Experiments. Chinese Physics C, 1993, 17(6): 481-485.
[17]	WANG Shu-Nuan. THEORETICAL ANALYSIS ON⁵²Cr(d,2n)⁵²Mn^g,m. Chinese Physics C, 1990, 14(10): 940-944.
[18]	LI Zeng-Hai,MAO Nai-Feng,SUN Qin-Ren. SHAPING AND ADJUSTING THE FRINGING FIELD OF IRON-FREE COILS BY USE OF SEPARATED COILS. Chinese Physics C, 1986, 10(5): 620-628.
[19]	LIU Mao-San,SHI Cai-Tu,CHEN Ren-Huai. MAGNETIC FIELD ANALYSIS OF PERMANENT MAGNET UNDULATOR. Chinese Physics C, 1984, 8(1): 59-68.
[20]	CUI HUAN-HUA,WU RI-SHENG,WANG SHI-CHENG. CR-39 PLASTIC SOLID STATE TRACK DETECTOR. Chinese Physics C, 1982, 6(4): 512-516.

Access

Get Citation

BIAN Wen-Long, YUAN Ping, MA Li-Zhen, HE Yuan, LI Qing, WU Wei and YAO Qing-Gao. Stress Analysis of CR Superferric Magnet[J]. Chinese Physics C, 2008, 32(S1): 11-14.

BIAN Wen-Long, YUAN Ping, MA Li-Zhen, HE Yuan, LI Qing, WU Wei and YAO Qing-Gao. Stress Analysis of CR Superferric Magnet[J]. Chinese Physics C, 2008, 32(S1): 11-14. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2008-01-09
Revised: 1900-01-01

Article Metric

Article Views(4368)
PDF Downloads(618)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Stress Analysis of CR Superferric Magnet

Corresponding author:BIAN Wen-Long,

Received Date:2008-01-09
Accepted Date:1900-01-01
Available Online:2008-01-04

Abstract:Finite Element Method is used in this article to analyze the stress of CR superferric magnet. Magnetic force and the stress caused by this force are calculated. The thermal stress and strain of the coil caused by cooling down is also analyzed. The result will be taken as a check for the design of the coil and coilcase, and also as a reference for the optimization of further design and quench protection.