Chinese Physics C > 2012, Vol. 36 > Issue(5): 475-478 DOI: 10.1088/1674-1137/36/5/017

Cs₂Te photocathode fabrication system at Peking University

Abstract
HTML
Reference
Related

PDF

Abstract：
A cesium telluride (Cs ₂Te) photocathode with a quantum efficiency of 13% at 253.7 nm (radiant incidence 200 μ/cm ²) is fabricated by tellurium and cesium vapor deposition onto a stainless-steel substrate. The cesium telluride cathode will be used to provide a high-brightness electron beam source for the 3+1/2 photo-injector at Peking University. The design of the system, the fabrication procedures and the preliminary experimental results are presented in this paper.

References

[1]

ZHAO Kui, CHEN Jia-Er, QUAN Sheng-Wen et al. Nucl. Instrum. Methods Phys. Res. A, 2002, 483(1-2): 125-1282 DING Yuan-Tao, HUANG Sen-Lin, ZHUANG Jie-Jia, WANG Yu-Gang, ZHAO Kui, CHEN Jia-Er. Nucl. In- strum. Methods Phys. Res. A, 2004, 528(1-2): 416-4203 ZHAO Kui, CHEN Jia-Er, HAO Jian-Kui, HU Yan-Le, QUAN Sheng-Wen, ZHANG Bao-Cheng, ZHUANG Jie-Ji. Nucl. Instrum. Methods Phys. Res. A, 2001, 475(1-3):564-5684 HAO Jian-Kui, ZHU Feng et al. 3.5-Cell Superconducting Cavity for DC-SRF Photoinjector at Peking University. Proceedings of SRF2009. Germany, Berlin, 20095 KONG S H et al. Cesium Telluride Photocathodes. J. Appl. Phys. (Suppl), 1995, 77: 6031-60386 Michelato P et al. Nucl. Instrum. Methods Phys. Res. A,1997, 393: 464-468

Access

Get Citation

DAI Jin, QUAN Sheng-Wen, CHANG Cheng, LIU Ke-Xin and ZHAO Kui. Cs ₂Te photocathode fabrication system at Peking University[J]. Chinese Physics C, 2012, 36(5): 475-478. doi: 10.1088/1674-1137/36/5/017

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2011-07-27
Revised: 2011-08-30

Article Metric

Article Views(4078)
PDF Downloads(309)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Cs₂Te photocathode fabrication system at Peking University

Received Date:2011-07-27
Accepted Date:2011-08-30
Available Online:2012-05-05

Abstract:A cesium telluride (Cs₂Te) photocathode with a quantum efficiency of 13% at 253.7 nm (radiant incidence 200 μ/cm²) is fabricated by tellurium and cesium vapor deposition onto a stainless-steel substrate. The cesium telluride cathode will be used to provide a high-brightness electron beam source for the 3+1/2 photo-injector at Peking University. The design of the system, the fabrication procedures and the preliminary experimental results are presented in this paper.