Chinese Physics C > 2011, Vol. 35 > Issue(10): 952-954 DOI: 10.1088/1674-1137/35/10/012

Thermal analysis of DTL in the SSC-LINAC

Abstract
HTML
Reference
Related

PDF

Abstract：
A linear accelerator as a new injector for the Separated Sector Cyclotron at the Heavy Ion Research Facility of LAN Zhou is being designed. The Drift-Tube-Linac (DTL) has been designed to accelerate ²³⁸U ³⁴⁺from 0.140 MeV/u to 0.97 MeV/u [1]. The 3D finite element analysis of thermal behavior is presented in this paper. During operation, the cavity will produce Joule heat. The cavity will not work normally due to the high temperature and thermal deformation will lead to frequency drift. So it is necessary to perform thermal analysis to ensure the correct working temperature is used. The result of the analysis shows that after the water cooling system is put into the cavity the temperature rise is about 20 degrees and the frequency drift is about 0.15%.

References

[1]	WANG Zhi-Jun, HE Yuan, WU Wei. Chinese Physics C (HEP NP), 2009, 33(1): 1-42 XIAO Yong-Chuan, FU Shi-Nian. Chinese Physics C (HEP NP), 2009, 33(9): 815-818

[1]	HUANG Da-Zhang,GU Qiang,WANG Zhen,ZHANG Meng,King Yuen. Analysis of the microbunching instability in a mid-energy electron linac. Chinese Physics C, 2015, 39(3): 038101.doi:10.1088/1674-1137/39/3/038101
[2]	WANG Jing,HUANG Jian-Long,HE Yuan,ZHANG Xiao-Qi,ZHANG Zhou-Li,SHI Ai-Min. Multi-physics analysis of the RFQ for Injector Scheme Ⅱ of C-ADS driver linac. Chinese Physics C, 2014, 38(10): 107005.doi:10.1088/1674-1137/38/10/107005
[3]	ZOU Yi-Qing,WANG Na,KANG Ling,QU Hua-Min,HE Zhe-Xi,YU Jie-Bing. Thermal analysis and cooling structure design of the primary collimator in CSNS/RCS. Chinese Physics C, 2013, 37(5): 057004.doi:10.1088/1674-1137/37/5/057004
[4]	WANG Hai-Jing,LIU Wei-Bin,QU Hua-Min,ZHU Dong-Hui,HUANG Nan,KANG Ling,LIU Ren-Hong. Thermal analysis and optimization of proton beam window for the CSNS. Chinese Physics C, 2013, 37(7): 077001.doi:10.1088/1674-1137/37/7/077001
[5]	SUN Lie-Peng,ZHAO Hong-Wei,SUN Zhou-Ping,HE Yuan,SHI Ai-Min,XIAO Chen,DU Xiao-Nan,ZHANG Cong,ZHANG Zhou-Li. Design study of the SSC-LINAC re-buncher. Chinese Physics C, 2013, 37(2): 027002.doi:10.1088/1674-1137/37/2/027002
[6]	SUN Xian-Jing,DENG Chang-Dong,KANG Wen. Transient electromagnetic simulation and thermal analysis of the DC-biased AC quadrupole magnet for CSNS/RCS. Chinese Physics C, 2012, 36(5): 443-446.doi:10.1088/1674-1137/36/5/011
[7]	PEI Shi-Lun,CHI Yun-Long,ZHANG Jing-Ru,HOU Mi,LI Xiao-Ping. RF-thermal-structural-RF coupled analysis on a travelling wave disk-loaded accelerating structure. Chinese Physics C, 2012, 36(6): 555-560 .doi:10.1088/1674-1137/36/6/013
[8]	XIAO Chen,HE Yuan,YUAN You-Jin,LU Yuan-Rong,LIU Yong,WANG Zhi-Jun,DU Xiao-Nan,YAO Qing-Gao,LIU Ge,XU Meng-Xin,HE Shou-Bo,XIA Jia-Wen. A particle-in-cell mode beam dynamics simulation of medium energy beam transport for the SSC-Linac. Chinese Physics C, 2012, 36(1): 84-90.doi:10.1088/1674-1137/36/1/015
[9]	LI Xiao-Ni,YUAN You-Jin,XIAO Chen,HE Yuan,WANG Zhi-Jun,SHENG Li-Na. Beam dynamics simulation of HEBT for the SSC-linac injector. Chinese Physics C, 2012, 36(11): 1126-1131.doi:10.1088/1674-1137/36/11/016
[10]	LIU Hua-Chang,PENG Jun,YIN Xue-Jun,OUYANG Hua-Fu,FU Shi-Nian. RF power coupling for the CSNS DTL. Chinese Physics C, 2011, 35(1): 92-95.doi:10.1088/1674-1137/35/1/019
[11]	XIAO Chen,HE Yuan,YUAN You-Jin,YAO Qing-Gao,WANG Zhi-Jun,CHANG Wei,LIU Yong,XIA Jia-Wen. Particle-in-cell mode beam dynamics simulation of the low energy beam transport for the SSC-linac injector. Chinese Physics C, 2011, 35(5): 500-504.doi:10.1088/1674-1137/35/5/019
[12]	WANG Yu-Sa,CHEN Yong,XU Yu-Peng,WANG Juan,CUI Wei-Wei,LI Wei,HAN Da-Wei,ZHANG Zi-Liang,CHEN Tian-Xiang,LI Cheng-Kui,YANG Yan-Ji,LIU Xiao-Yan,HUO Jia,ZHANG Jun-Min,ZHENG Yi-Qian. Thermal analysis and expected performance of the low energy instrument on board the HXMT satellite. Chinese Physics C, 2010, 34(12): 1812-1817.doi:10.1088/1674-1137/34/12/005
[13]	WU Xiao-Bing,OUYANG Hua-Fu. Thermal analysis of the CSNS H^－ion source. Chinese Physics C, 2010, 34(5): 580-583.doi:10.1088/1674-1137/34/5/013
[14]	LIU Hua-Chang,PENG Jun,RUAN Yu-Fang,FU Shi-Nian. Thermal analysis for the high duty cycle PIMS accelerator. Chinese Physics C, 2010, 34(7): 1005-1008.doi:10.1088/1674-1137/34/7/014
[15]	XIAO Chen,HE Yuan,LU Yuan-Rong,Yuri Batygin,YIN Ling,WANG Zhi-Jun,YUAN You-Jin,LIU Yong,CHANG Wei,DU Xiao-Nan,WANG Zhi,XIA Jia-Wen. A Particle-in-cell scheme of the RFQ in the SSC-Linac. Chinese Physics C, 2010, 34(11): 1749-1753.doi:10.1088/1674-1137/34/11/016
[16]	WANG Zhi-Jun,HE Yuan,WU Wei,YANG Ya-Qing,XIAO Chen. Design optimization of the APF DTL in the SSC-linac. Chinese Physics C, 2010, 34(10): 1639-1642.doi:10.1088/1674-1137/34/10/017
[17]	XU Qing-Jin,Ohuchi Norihito,Kiyosumi Tsuchiya,Tsai Ming-Hsun,ZONG Zhan-Guo,ZHAI Ji-Yuan,GAO Jie. Thermal simulation and analysis of the STF cryomodule. Chinese Physics C, 2009, 33(3): 236-239.doi:10.1088/1674-1137/33/3/014
[18]	WANG Yi-Fang. Beam Matching Between SFC and SSC. Chinese Physics C, 2008, 32(S1): 223-225.
[19]	LIU Hua-Chang,OUYANG Hua-Fu. Thermal analysis and water-cooling design of the CSNS MEBT 324MHz buncher cavity. Chinese Physics C, 2008, 32(4): 280-284.doi:10.1088/1674-1137/32/4/008
[20]	LI Zhi-Hui,ZHENG Qi-Wen,GAO Yi-Hai,ZHANG Sheng-Hu,WU Jian-Qiang,WEN Ming,YU Qi. Numerical Simulation and Analysis of SSC RF Cavity. Chinese Physics C, 2005, 29(1): 91-94.

Access

Get Citation

WU Xi, YUAN Ping, HE Yuan, MA Li-Zhen, ZHANG Xiao-Qi, WU Wei and YANG Ya-Qing. Thermal analysis of DTL in the SSC-LINAC[J]. Chinese Physics C, 2011, 35(10): 952-954. doi: 10.1088/1674-1137/35/10/012

WU Xi, YUAN Ping, HE Yuan, MA Li-Zhen, ZHANG Xiao-Qi, WU Wei and YANG Ya-Qing. Thermal analysis of DTL in the SSC-LINAC[J]. Chinese Physics C, 2011, 35(10): 952-954. doi:10.1088/1674-1137/35/10/012 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2010-08-23
Revised: 2011-05-27

Article Metric

Article Views(4406)
PDF Downloads(480)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Thermal analysis of DTL in the SSC-LINAC

Received Date:2010-08-23

Accepted Date:2011-05-27

Available Online:2011-10-05

Abstract:A linear accelerator as a new injector for the Separated Sector Cyclotron at the Heavy Ion Research Facility of LAN Zhou is being designed. The Drift-Tube-Linac (DTL) has been designed to accelerate²³⁸U³⁴⁺from 0.140 MeV/u to 0.97 MeV/u [1]. The 3D finite element analysis of thermal behavior is presented in this paper. During operation, the cavity will produce Joule heat. The cavity will not work normally due to the high temperature and thermal deformation will lead to frequency drift. So it is necessary to perform thermal analysis to ensure the correct working temperature is used. The result of the analysis shows that after the water cooling system is put into the cavity the temperature rise is about 20 degrees and the frequency drift is about 0.15%.

HTML

Reference (1)

Thermal analysis of DTL in the SSC-LINAC

Abstract：

References

Access

Article Metrics

Metrics

通讯作者:陈斌, bchen63@163.com

Email This Article

Thermal analysis of DTL in the SSC-LINAC

HTML

目录