Chinese Physics C > 2006, Vol. 30 > Issue(2): 159-162

Construction and Commissioning of HLS Injection Bump System

National Synchrotron Radiation Laboratory,University of Science and Technology of China, Hefei 230029, China

Abstract
HTML
Reference
Related

PDF

Abstract：
This paper describes the construction and the commissioning of the new injection bump system of HLS ring. An emphasis of the discussion is put on various errors of the system and the method of evaluation and reduction. After some improvements and fine adjustment, an average injection rate of 2—6mA/s was obtained in the daily operation and a maximum accumulated current of 400mA achieved. The injection system has run for almost two years and played an important role in the operation of the light source.

References

[1]

. LIU Zu-Ping, LI Wei-Min. Progress of the NSRL PhaseTwo Project. In: Proceedings of the Second Asian ParticleAccelerator Conference. Beijing, China, 2001. 235-2382. SHANG Lei, WANG Xiang-Qi, PEI Yuan-Ji. Nucl. In-strum. Methods in Phys. Res., 1998, 406(2): 171-1813. SHANG Lei et al. New Injection Kicker Modulators for HLS Ring. IEEE, Proceedings of PAC2001, 5: 4059-40614. SHANG Lei. Physical Design of HLS New Injection Bump System and R D of Ceramic Chambers. Ph.D. Thesis,USTC, Dec. 1999, (in Chinese)(尚需.HLS新注入系统物理设计及陶瓷真空室的研制.中国科学技术大学博士论文1999, 12)5. SHANG Lei, WANG Xiang-Qi, JIANG Dao-Man et al.IEEE Transaction on Nuclear Science, 2004, 51(1): 2454-2459

[1]	ZHAO Ming-Hua,LIN Guo-Qiang,ZHONG Shao-Peng,WANG Bao-Liang,ZHANG Jun-Qiang,LIU Wei-Hong,ZHOU Wei-Min,CHENG Yong-Zhong. Design and Commissioning of a 150MeV Linac for SSRF. Chinese Physics C, 2008, 32(S1): 244-246.
[2]	ZHANG Wen-Zhi,LIU Gui-Min,ZHAO Li-Ying,DAI Zhi-Min. Physical Design of the SSRF Timing System. Chinese Physics C, 2008, 32(S1): 109-111.
[3]	HE Xiao-Ye,WU Jun. Technological Plan of HLS in SSRF. Chinese Physics C, 2008, 32(S1): 62-64.
[4]	CAO Yong,SUN Bao-Gen,HE Duo-Hui,LI Jian-Wei,LI Chuan,XUAN Ke,WANG Ji-Gang,LU Ping. Measurement and Analysis of Movement of BPM Vacuum Chamber for HLS. Chinese Physics C, 2008, 32(S1): 127-129.
[5]	XU Hong-Liang,SUN Bao-Gen,ZHANG Jian-Feng,XU Bing,HUANG Gui-Rong. Prophase Study of Electron Beam Energy Calibration for HLS. Chinese Physics C, 2008, 32(S1): 136-138.
[6]	SUN Bao-Gen,WANG Bao-Yun,WANG Ji-Gang,WANG Jun-Hua,LU Ping,SHEN Chao-Bo. Research and Measurement of Synchrotron Radiation System for HLS. Chinese Physics C, 2008, 32(S1): 133-135.
[7]	WANG Guang-Wei,SHA Peng,PAN Wei-Min,SUN Yi,LI Zhong-Quan,LIU Rong,HUANG Tong-Ming,ZENG Ri-Hua,ZHAO Guang-Yuan,HUANG Hong,XU Yu-Fen,MA Qiang,LIN Hai-Ying,XU Bo,WANG Qun-Yao. Construction of the BEPCⅡ RF System. Chinese Physics C, 2008, 32(S1): 169-171.
[8]	LI Chuan,BAO Xun,WANG Ji-Gang,XUAN Ke,JIANG Si-Yuan,CAO Shu-Li,LI Wei-Min. Temperature Monitor System of HLS Storage Ring. Chinese Physics C, 2008, 32(S1): 130-132.
[9]	LI Ji-Hao,SUN Bao-Gen,HE Duo-Hui,LIU Gong-Fa,LU Ping,CAO Yong. Research and Measurement of BPM System at HLS LINAC. Chinese Physics C, 2007, 31(1): 96-100.
[10]	JIANG Bo-Cheng,LIU Gui-Min,Dai Zhi-Min,ZHAO Zhen-Tang. Calculation of Coupling Impedance of the Injection Section for the SSRF Storage Ring. Chinese Physics C, 2006, 30(S1): 22-24.
[11]	ZHANG He,WANG Lin,HE Duo-Hui. Design of the HLS High Brilliance Lattice. Chinese Physics C, 2006, 30(S1): 138-140.
[12]	XU Hong-Liang,WANG Lin,SUN Bao-Gen,lshang,LI Wei-Min,LIU Zu-Ping,HE Duo-Hui. The Adjustment of Phase II Upgraded Program of Hefei Electron Storage Ring. Chinese Physics C, 2006, 30(S1): 165-167.
[13]	WANG Xiang-Qi,HAO Hao,FENG Guang-Yao. Application of Frequency Map Analysis to HLS GPLS Mode. Chinese Physics C, 2006, 30(3): 238-241.
[14]	SUN Bao-Gen,ZHENG Pu,LU Ping,XU Hong-Liang,WANG Jun-Hua,WANG Ji-Gang,WANG Bao-Yun. Development of New Beam Profile and Emittance Measurement System for HLS. Chinese Physics C, 2006, 30(8): 792-796.
[15]	WANG Jun-Hua,LIU Jian-Hong,SUN Bao-Gen,LI Wei-Min,LIU Zu-Ping,YANG Yong-Liang. Calibration of Turn-by-Turn System of HLS and Its Application. Chinese Physics C, 2004, 28(5): 544-548.
[16]	XU Hong-Liang,WANG Lin,AN Yi-Bin,JIANG Si-Yuan,SUN Bao-Gen,LI Wei-Min,LIU Zu-Ping,HE Duo-Hui. The Adjustment of RF System for Hefei Storage Ring. Chinese Physics C, 2003, 27(5): 449-451.
[17]	SUN Bao-Gen,LU Ping,HE Duo-Hui,XU Hong-Liang,WANG Jun-Hua,GUO Cong-Liang,HONG Jun,LIU Jian-Hong. Development of New DCCT System for Hefei Light Source. Chinese Physics C, 2003, 27(2): 169-172.
[18]	LI YongJun,JIN YuMing,LI WeiMin,SUN BaoGen,YIN LiXin,LIU ZuPing,GAO Hui. Ion Trapping and the DC Ions Clearing in HLS Ring. Chinese Physics C, 2000, 24(5): 439-444.
[19]	ZHUANG JieJia,ZHAO Yu. Building Polarized γ-Ray Source in BEPC. Chinese Physics C, 2000, 24(9): 870-874.
[20]	ZHOU Qing-Yi,WANG Shu-Hong,PAN Hui-Bao,LUO Zi-Hua,XIAO Lan-Rong,ZHANG Ying-Xiang. DESIGN CONSTRUCTION AND BEAM TEST OF THE BEIJING 35MeV PROTON LINGAR ACCELERATOR. Chinese Physics C, 1987, 11(1): 85-91.

Access

Get Citation

SHANG Lei, WANG Xiang-Qi, WANG Lin, JIA Dao-Man and ZHAO Feng. Construction and Commissioning of HLS Injection Bump System[J]. Chinese Physics C, 2006, 30(2): 159-162.

SHANG Lei, WANG Xiang-Qi, WANG Lin, JIA Dao-Man and ZHAO Feng. Construction and Commissioning of HLS Injection Bump System[J]. Chinese Physics C, 2006, 30(2): 159-162. shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2005-06-14
Revised: 2005-08-08

Article Metric

Article Views(4238)
PDF Downloads(568)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Construction and Commissioning of HLS Injection Bump System

Corresponding author:SHANG Lei,

National Synchrotron Radiation Laboratory,University of Science and Technology of China, Hefei 230029, China

Received Date:2005-06-14
Accepted Date:2005-08-08
Available Online:2006-02-05

Abstract:This paper describes the construction and the commissioning of the new injection bump system of HLS ring. An emphasis of the discussion is put on various errors of the system and the method of evaluation and reduction. After some improvements and fine adjustment, an average injection rate of 2—6mA/s was obtained in the daily operation and a maximum accumulated current of 400mA achieved. The injection system has run for almost two years and played an important role in the operation of the light source.