Chinese Physics C > 2014, Vol. 38 > Issue(12): 127002 DOI: 10.1088/1674-1137/38/12/127002

A new measurement method for electrode gain in an orthogonally symmetric beam position monitor

Abstract
HTML
Reference
Related

PDF

Abstract：
The new beam position monitor (BPM) system of the injector at the upgrade project of the Hefei Light Source (HLS Ⅱ) has 19 stripline beam position monitors. Most consist of four orthogonally symmetric stripline electrodes. Differences in electronic gain and mismachining tolerance can cause changes in the beam response of the BPM electrodes. This variation will couple the two measured horizontal positions, resulting in measuring error. To alleviate this effect, a new technique to measure the relative response of the four electrodes has been developed. It is independent of the beam charge, and the related coefficient can be calculated theoretically. The effect of electrode coupling on this technique is analyzed. The calibration data is used to fit the gain for all 19 injector beam position monitors. The results show the standard deviation of the distribution of measured gains is about 5%.

References

[1]

ZOU Jun-Ying, YANG Yong-Liang, SUN Bao-Gen et al. Calibration of Beam Position Monitors in the Injector of HLS Ⅱ. Proceedings of IPAC2013. Shanghai, China, 2013. 568-570[2] Rubin D L, Billing M, Meller R et al. Phys. Rev. ST Accel. Beams, 2010, 13(9): 092802-1-092802-6[3] LI Peng, SUN Bao-gen, LUO Qing et al. High Power Laser and Particle Beams, 2008, 20(4): 573-578[4] Olmos A, Pérez F, Rehm G. Matlab Code for BPM Button Geometry Computation. Proceedings of DIPAC 2007. Venice, Itally, 2007. 186-188[5] ZOU Jun-Ying, FANG Jia, SUN Bao-Gen, et al. Application of Libera Brilliance Single Pass at NSRL Linac BPM System. Proceedings of IPAC2011. San Sebastián, Spain, 2013. 1284-1286

[1]	Hui-Cai Li,Zhi-Guo Yao,Chun-Xu Yu,Ming-Jun Chen,Han-Rong Wu,Min Zha,Bo Gao,Xiao-Jie Wang,Jin-Yan Liu,Wen-Ying Liao. A method to monitor and measure the water transparency in LHAASO-WCDA using cosmic muon signals. Chinese Physics C, 2017, 41(2): 026002.doi:10.1088/1674-1137/41/2/026002
[2]	Jian-Yong Zhang,Xiao Cai,Xiao-Hu Mo,Di-Zhou Guo,Jian-Li Wang,Bai-Qi Liu,M. N. Achasov,A. A. Krasnov,N. Yu. Muchnoi,E. E. Pyata,E. V. Mamoshkina,F. A. Harris. Upgrade of beam energy measurement system at BEPC-Ⅱ. Chinese Physics C, 2016, 40(7): 076001.doi:10.1088/1674-1137/40/7/076001
[3]	Yong Zhang,Jun-Xia Wu,Guang-Yu Zhu,Huan Jia,Zong-Heng Xue,Hai Zheng,Hong-Ming Xie,Xin-Cai Kang,Yuan He,Lin Li,Jean Claude Denard. Capacitive beam position monitors for the low-βbeam of the Chinese ADS proton linac. Chinese Physics C, 2016, 40(2): 027003.doi:10.1088/1674-1137/40/2/027003
[4]	Ming-Dao Sun,Tian-Heng Huang,Zhong Liu,Bing Ding,Hua-Bin Yang,Zhi-Yuan Zhang,Jian-Guo Wang,Long Ma,Lin Yu,Yong-Sheng Wang,Zai-Guo Gan,Xiao-Hong Zhou. An improved method of energy calibration for position-sensitive silicon detectors. Chinese Physics C, 2016, 40(4): 046202.doi:10.1088/1674-1137/40/4/046202
[5]	Chao-Cai Cheng,Bao-Gen Sun,Yong-Liang Yang,Ze-Ran Zhou,Ping Lu,Fang-Fang Wu,Ji-Gang Wang,Kai Tang,Qing Luo,Hao Li,Jia-Jun Zheng,Qing-Ming Duan. Beam size and position measurement based on logarithm processing algorithm in HLS Ⅱ. Chinese Physics C, 2016, 40(4): 047004.doi:10.1088/1674-1137/40/4/047004
[6]	JIA Qi-Ka. Analytical formula of free electron laser exponential gain for a non-resonant electron beam. Chinese Physics C, 2015, 39(4): 048101.doi:10.1088/1674-1137/39/4/048101
[7]	XIE Hong-Ming,WU Jun-Xia,ZHANG Yong,ZHU Guang-Yu,XIA Jia-Wen,YE Min-You. Beam experiments with a non-intercepting beam induced fluorescence profile monitor for the ADS LINAC. Chinese Physics C, 2015, 39(11): 117004.doi:10.1088/1674-1137/39/11/117004
[8]	ZHU Hong-Yan,DONG Lan,LI Bo. Design and simulation of a wire position monitor for cryogenicsystems in an ADS linac. Chinese Physics C, 2014, 38(8): 087001.doi:10.1088/1674-1137/38/8/087001
[9]	GUO Yu-Xian,XU Peng-Shou. Influence of the photon beam position on incident SR intensity at the SXMCD endstation. Chinese Physics C, 2013, 37(12): 128002.doi:10.1088/1674-1137/37/12/128002
[10]	LIU Mei,DAI Hong-Liang,QI Hui-Rong,ZHUANG Bao-An,ZHANG Jian,LIU Rong-Guang,ZHU Qi-Ming,OUYANG Qun,CHEN Yuan-Bo,JIANG Xiao-Shan,WANG Ya-Jie,LIU Peng,CHANG Guang-Cai. Beam test of a one-dimensional position sensitive chamber on synchrotron radiation. Chinese Physics C, 2013, 37(10): 108001.doi:10.1088/1674-1137/37/10/108001
[11]	SU Jia-Hang,DU Ying-Chao,HUA Jian-Fei,ZHENG Shu-Xin,QIU Jia-Qi,YANG Jin,HUANG Wen-Hui,CHEN Huai-Bi,TANG Chuan-Xiang. Design and cold test of a rectangular cavity beam position monitor. Chinese Physics C, 2013, 37(1): 017002.doi:10.1088/1674-1137/37/1/017002
[12]	TIAN Jian-Min,XU Mei-Hang,ZHAO Zhong-Liang,CHEN Chang,RUAN Xiang-Dong,CHEN Yuan-Bo,XU Tao-Guang,LU Shuang-Tong. Improved design and construction of an ionization chamber for the CSNS beam loss monitor (BLM). Chinese Physics C, 2012, 36(4): 329-333.doi:10.1088/1674-1137/36/4/006
[13]	ZHOU Jian-Rong,SUN Zhi-Jia,LIU Ben,WANG Yan-Feng,YANG Gui-An,ZHOU Liang,XU Hong,DONG Jing,YANG Lei,LI Yi. Neutron beam monitor based on a boron-coated GEM. Chinese Physics C, 2011, 35(7): 668-674.doi:10.1088/1674-1137/35/7/012
[14]	LI Xiang,ZHENG Shu-Xin. Design and experiments for the waveguide to coaxial cable adapter of a cavity beam position monitor. Chinese Physics C, 2011, 35(1): 79-82.doi:10.1088/1674-1137/35/1/016
[15]	MO Xiao-Hu,CHU Yuan-Ping,DONG Hai-Yi,FU Cheng-Dong,LI Xiao-Nan,LIU Qian,QU Hua-Min,QIN Qing,SHEN Cheng-Ping,WANG Yi-Fang,XU Jin-Qiang,ZHANG Jian-Yong,ZHANG Qing-Jiang,ZHANG Yin-Hong,ZHANG Tian-Bao,ZHAO Zhuo. Beam energy measurement system at BEPCⅡ. Chinese Physics C, 2010, 34(6): 912-917.doi:10.1088/1674-1137/34/6/050
[16]	LI Xiang,ZHENG Shu-Xin. Simulation and experiments for theQ_extof a cavity beam position monitor. Chinese Physics C, 2010, 34(3): 405-408.doi:10.1088/1674-1137/34/3/020
[17]	for the,CLAS collaboration. A new beam asymmetry measurement from pion photoproduction on the neutron using CLAS. Chinese Physics C, 2009, 33(12): 1369-1372.doi:10.1088/1674-1137/33/12/057
[18]	XU Mei-Hang,TIAN Jian-Min,CHEN Chang,CHEN Yuan-Bo,XU Tao-Guang,LU Shuang-Tong. Design and construction of the first prototype ionization chamber for CSNS and PA beam loss monitor (BLM) system. Chinese Physics C, 2009, 33(2): 123-126.doi:10.1088/1674-1137/33/2/010
[19]	RUAN Yu-Fang,XU Tao-Guang,FU Shi-Nian. Design and simulation of a beam position monitor for the high current proton linac. Chinese Physics C, 2009, 33(3): 240-244.doi:10.1088/1674-1137/33/3/015
[20]	CHU Jian-Hua,TONG De-Chun,ZHAO Zhen-Tang. RF measurements of a C-band cavity beam position monitor. Chinese Physics C, 2008, 32(5): 385-388.doi:10.1088/1674-1137/32/5/012

Access

Get Citation

ZOU Jun-Ying, WU Fang-Fang, YANG Yong-Liang, SUN Bao-Gen, ZHOU Ze-Ran, LUO Qing, LU Ping and XU Hong-Liang. A new measurement method for electrode gain in an orthogonally symmetric beam position monitor[J]. Chinese Physics C, 2014, 38(12): 127002. doi: 10.1088/1674-1137/38/12/127002

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2014-01-02
Revised: 2014-03-03

Article Metric

Article Views(3530)
PDF Downloads(185)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

A new measurement method for electrode gain in an orthogonally symmetric beam position monitor

Corresponding author:ZOU Jun-Ying,

Corresponding author:SUN Bao-Gen,

Received Date:2014-01-02

Accepted Date:2014-03-03

Available Online:2014-12-05

Abstract:The new beam position monitor (BPM) system of the injector at the upgrade project of the Hefei Light Source (HLS Ⅱ) has 19 stripline beam position monitors. Most consist of four orthogonally symmetric stripline electrodes. Differences in electronic gain and mismachining tolerance can cause changes in the beam response of the BPM electrodes. This variation will couple the two measured horizontal positions, resulting in measuring error. To alleviate this effect, a new technique to measure the relative response of the four electrodes has been developed. It is independent of the beam charge, and the related coefficient can be calculated theoretically. The effect of electrode coupling on this technique is analyzed. The calibration data is used to fit the gain for all 19 injector beam position monitors. The results show the standard deviation of the distribution of measured gains is about 5%.

HTML

Reference (1)

A new measurement method for electrode gain in an orthogonally symmetric beam position monitor

Abstract：

References

Access

Article Metrics

Metrics

通讯作者:陈斌, bchen63@163.com

Email This Article