Chinese Physics C > 2010, Vol. 34 > Issue(3): 389-393 DOI: 10.1088/1674-1137/34/3/016

Eddy current septum magnets for injection and extraction at SSRF

Abstract
HTML
Reference
Related

PDF

Abstract：

There are 6 in-vacuum eddy current septum magnets used for booster injection, extraction, and storage ring injection in SSRF. Special attention was paid to coils and their support designs because of the shock force they bear in the magnetic fields and the high heat which is hard to be dissipated in vacuum environment. For the storage ring magnets, good transverse homogeneity in the gap was achieved by careful design, precise machining and accurate assembly; and an extremely low leakage field on the stored beam is another key feature thanks to the high permeability Mu metal. Magnetic field measurement was conducted with both a point coil and a long integral coil, and the results agree well with the OPERA-2d/3d simulations. An inner tube is added to keep the continuity of impedance for the circulating beam with two RF finger flanges at each end. There is no vacuum separation between the inner tube and the magnet chamber. Sputter ion pumps integrated with NEG are used to acquire the UHV for the chamber.

References

[1]	. KANG Wen, HAN Qian, FU Lu-Xin et al. Development of an Eddy-current Septum Magnet for the SSRF Storage Ring. APAC 2001 Proceedings. Beijing China, 2001. 663-6652. Gough C, Mailand M. Septum and Kicker Systems for the SLS. PAC 2001 Proceedings. Chicago, US, 2001, 5: 3741-3743

[1]	Wei Wang,Xiao-Ye He,Zheng Tang,Qiu-Yang Yao. Smoothing analysis of HLSII storage ring magnets. Chinese Physics C, 2016, 40(12): 127001.doi:10.1088/1674-1137/40/12/127001
[2]	YANG Yong,LENG Yong-Bin,YAN Ying-Bing,CHEN Zhi-Chu. Injection performance evaluation for SSRF storage ring. Chinese Physics C, 2015, 39(9): 097003.doi:10.1088/1674-1137/39/9/097003
[3]	PENG Quan-Ling,WANG Bing,CHEN Yuan,YANG Xiang-Chen. Physical design of superconducting magnet for ADS injection Ⅰ. Chinese Physics C, 2014, 38(3): 037002.doi:10.1088/1674-1137/38/3/037002
[4]	YANG Xiang-Chen,PENG Quan-Ling,XU Feng-Yu,CHEN An-Bin,GAO Yao,HOU Zhen-Hua,WANG Bing. Field measurement for superconducting magnets of ADS injector Ⅰ. Chinese Physics C, 2014, 38(10): 107004.doi:10.1088/1674-1137/38/10/107004
[5]	WANG Bing,PENG Quan-Ling,YANG Xiang-Chen,LI Shao-Peng. Current leads for superconducting magnets of ADS injector Ⅰ. Chinese Physics C, 2014, 38(6): 067004.doi:10.1088/1674-1137/38/6/067004
[6]	XIE Xiu-Cui,SONG Ming-Tao,ZHANG Xiao-Hu. Simulation of stripping injection into HITFiL with carbon ion. Chinese Physics C, 2013, 37(9): 097004.doi:10.1088/1674-1137/37/9/097004
[7]	YE Feng. Recalculation of the HIRFL-SSC injection and extraction system. Chinese Physics C, 2013, 37(4): 047001.doi:10.1088/1674-1137/37/4/047001
[8]	SHI Jian,YANG Jian-Cheng,XIA Jia-Wen,YUAN You-Jin,LI Jie,CHAI Wei-Ping,SONG Ming-Tao,ZHANG Xiao-Hu. RF knock-out extraction in HITFiL. Chinese Physics C, 2012, 36(10): 1004-1008.doi:10.1088/1674-1137/36/10/016
[9]	XU Shou-Yan,WANG Sheng. Study of eddy current power loss in an RCS vacuum chamber. Chinese Physics C, 2012, 36(2): 160-166.doi:10.1088/1674-1137/36/2/011
[10]	ZHU Ying-Shun,YANG Mei,ZHANG Zhuo,CHEN Wan,YIN Bao-Gui,SHI Cai-Tu,KANG Wen. Design and end chamfer simulation of PEFP beam line curved dipole magnets. Chinese Physics C, 2011, 35(7): 684-688.doi:10.1088/1674-1137/35/7/015
[11]	SONG Jin-Xing,KANG Wen,HUO Li-Hua,HAO Yao-Dou,WANG Lei. The eddy current induced in the pulsed bump magnet for the CSNS/RCS injection. Chinese Physics C, 2011, 35(8): 778-783.doi:10.1088/1674-1137/35/8/015
[12]	Young Bing-Lin. Current status of neutrino physics. Chinese Physics C, 2010, 34(2): 287-298.doi:10.1088/1674-1137/34/2/026
[13]	WU Jun-Xia,ZHENG Jian-Hua,ZHAO Tie-Cheng,MAO Rui-Shi,YIN Yan,YUAN You-Jin,YANG Jian-Cheng. An integrating current transformer for fast extraction from the HIRFL-CSR main ring. Chinese Physics C, 2010, 34(1): 131-133.doi:10.1088/1674-1137/34/1/024
[14]	ZHAO Yu-Bin,YIN Cheng-Ke,ZHANG Tong-Xuan,FU Ze-Chuan,ZHAO Zhen-Tang,DAI Zhi-Min,LIU Jian-Fei,WANG Fang. Digital prototype of LLRF system for SSRF. Chinese Physics C, 2008, 32(9): 758-760.doi:10.1088/1674-1137/32/9/015
[15]	TANG Jing-Yu. Injection and Extraction Techniques in Circular Accelerators. Chinese Physics C, 2008, 32(S1): 256-258.
[16]	ZHANG Jin-Quan,SONG Ming-Tao,WEI Bao-Wen. Injection system design for a hadron therapy synchrotron. Chinese Physics C, 2008, 32(5): 393-396.doi:10.1088/1674-1137/32/5/014
[17]	HOU Jie,LIU Gui-Min,LI Hao-Hu,ZHANG Man-Zhou. Sorting of bending magnets for the SSRF booster. Chinese Physics C, 2008, 32(4): 285-289.doi:10.1088/1674-1137/32/4/009
[18]	KANG Wen,DING Xiao-Ping,HAN Qian,PANG Jia-Biao,CHEN Sen-Yu. Design and Construction of a Thin Septum Magnet Prototype for Injection of SSRF Storage Ring. Chinese Physics C, 2002, 26(4): 423-429.
[19]	YUAN You-Jin,WU Jun-Li,WANG Yi-Guo,XU Xiang-Yang. The Influence of the Edge Field of Magnets on Beam Injection. Chinese Physics C, 2001, 25(1): 57-60.
[20]	KANG Wen,DING Xiao-Ping,HAN Qian,PANG Jia-Biao,CHEN Sen-Yu. Theoretical Analysis and Computer Simulation of Eddy-Current Septum Magnets. Chinese Physics C, 2001, 25(3): 264-270.

Access

Get Citation

OUYANG Lian-Hua, GU Ming, LIU Bo and CHEN Rong. Eddy current septum magnets for injection and extraction at SSRF[J]. Chinese Physics C, 2010, 34(3): 389-393. doi: 10.1088/1674-1137/34/3/016

OUYANG Lian-Hua, GU Ming, LIU Bo and CHEN Rong. Eddy current septum magnets for injection and extraction at SSRF[J]. Chinese Physics C, 2010, 34(3): 389-393. doi:10.1088/1674-1137/34/3/016 shu

RIS(for EndNote,Reference Manager,ProCite)

BibTex

Txt

Milestone

Received: 2009-03-23
Revised: 2009-05-26

Article Metric

Article Views(4436)
PDF Downloads(544)
Cited by(0)

Policy on re-use

To reuse of subscription content published by CPC, the users need to request permission from CPC, unless the content was published under an Open Access license which automatically permits that type of reuse.

通讯作者:陈斌, bchen63@163.com

1.
沈阳化工大学材料科学与工程学院沈阳 110142

Eddy current septum magnets for injection and extraction at SSRF

Corresponding author:OUYANG Lian-Hua,

Received Date:2009-03-23
Accepted Date:2009-05-26
Available Online:2010-03-05

Abstract:

There are 6 in-vacuum eddy current septum magnets used for booster injection, extraction, and storage ring injection in SSRF. Special attention was paid to coils and their support designs because of the shock force they bear in the magnetic fields and the high heat which is hard to be dissipated in vacuum environment. For the storage ring magnets, good transverse homogeneity in the gap was achieved by careful design, precise machining and accurate assembly; and an extremely low leakage field on the stored beam is another key feature thanks to the high permeability Mu metal. Magnetic field measurement was conducted with both a point coil and a long integral coil, and the results agree well with the OPERA-2d/3d simulations. An inner tube is added to keep the continuity of impedance for the circulating beam with two RF finger flanges at each end. There is no vacuum separation between the inner tube and the magnet chamber. Sputter ion pumps integrated with NEG are used to acquire the UHV for the chamber.